期刊文献+

内燃机油模拟评定方法及其局限性 被引量:8

THE SIMULATION EVALUATION METHODS OF CRANKCASE OILS AND THEIR LIMITATION
下载PDF
导出
摘要 对汽油机油、柴油机油模拟评定方法进行了论述 ,并对导致内燃机油油泥、漆膜、积炭和烟炱的生成机理与其相关模拟台架试验的相关性进行分析 ,结果认为 :汽油机油模拟评定试验已有了相当数量 ,有的被列入规格 ,而柴油机油只停留在模拟CD水平 ,部分模拟试验方法有一定的局限性。 The simulation evaluation methods of gasoline engine oils and diesel engine oils are reviewed.The correlation between the mechanism of formation of oil sludge,lacquer,carbon deposit and soot both in gasoline and diesel engines and their relative bench tests is analyzed.The results show that there are many simulation evaluation tests for gasoline engine oils and some of them have been listed at specification.Evaluation tests for diesel engine oils only are the CD level,showing the limitation of the simulation test methods.
作者 杨道胜
出处 《润滑油》 CAS 2003年第6期6-12,共7页 Lubricating Oil
关键词 内燃机油 评定方法 模拟 crankcase oil evaluation method simulation
  • 相关文献

参考文献9

  • 1陈刚,赵坚,蒲晓琴,牛成继.CMOT试验与Cat 1G_2/1H_2台架试验相关性的研究[J].润滑油,2002,17(6):40-43. 被引量:4
  • 2Stephen Hsu. Lubrication Engineering [ J ]. 1983,40 ( 2 ) :75.
  • 3Stephen Hsu. A Modified Thin - Film Oxygen Uptake Test(Tfout) for the Evaluation of Lubricant Stability in Astm Sequence Iiie Test[A]. SAE Paper 902121[C]. 1990.
  • 4T Colelough. Laboratory and Field Performance of Zero Phosphorus Oils[A]. SAE Paper 910868[C]. 1991.
  • 5G A Mazzamaro. Proper Antioxidant Selection for Api Sh By Statistical Evaluation in a New Sequence Iiie Screening Test[A]. SAE Paper 940793[C]. 1994.
  • 6J Geyer ACS. NYC Meeting D iv Petrol Chem T [ Z ].1969.
  • 7M Kawamura. Sludge Formation and Engine Oil Dispersancy Evaluation with a Laboratory Scale Sludge Simulator[A]. SAE Paper 892105[C]. 1989.
  • 8T W Selby. 12th Esslingen Colloquium, 2000 , Germany.
  • 9N Fulvlo. Evaluation of Diesel Engine Lubricants By Micro-Oxidation[A]. SAE Paper 890239[C]. 1989.

二级参考文献2

  • 1吕兆岐.国内外润滑油品简介[M].中国石化出版社,1996..
  • 2王季愚 张启先.内燃机润滑油性能试验[M].烃加工出版社,1994..

共引文献3

同被引文献66

引证文献8

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部