摘要
本文介绍了钢制柱式散热器熔剂法热浸镀铝工艺。生产试验表明,最佳的镀铝温度范围是690～710℃;浸镀时间约3min;提升速度为35～40mm/s。经热浸镀铝的钢制柱式散热器,不仅具有优良的耐蚀性,而且又有较好的装饰效果。
In this paper, hot-dip aluminium coating of small tube steel radiator by flux method was studied. The technological tests on a commercial scale show that the optimum temperature of coating bath is in the range of 690～710℃, the optimun time of hot dipping is about 3 min, and the elevating rate is 35～40mm/s. The aluminized small tube steel radiators have not only excellent corrosion resistance but also better decorative appearance.
出处
《金属热处理》
CAS
CSCD
北大核心
1989年第6期18-21,共4页
Heat Treatment of Metals
