摘要
在两个不同的双模谐振器上分别加载均匀阻抗支节和阶梯阻抗支节来实现双频带滤波器,并将其应用于GSM0.9~1.8GHz。使用HFSS软件对滤波器结构进行设计仿真,根据仿真结果对滤波器结构进行改进优化直至得出最优结果。将最优的滤波器结构制成实物并进行测试,得出的结果与仿真结果对比发现各项指标吻合。滤波器基本符合设计要求。
In this paper, HFSS is used to design and simulate the filter structure, and according to the simulation results, the filter structure is optimized many times until the optimal results are obtained. The optimum filter structure is made into an object and it is tested. The results are compared with the simulation results in order to come to a conclusion. Therefore, the filter is in line with the requirements.
作者
张奕楠
王学田
杜文越
冬业萱
ZHANG Yi-nan;WANG Xue-tian;DU Wen-yue;DONG Ye-xuan(School of Information and Electronics,Beijing Institute of Technology,Beijing 100081,China)
出处
《微波学报》
CSCD
北大核心
2018年第A02期337-340,共4页
Journal of Microwaves
关键词
阶梯阻抗谐振器
双频段
带通滤波器
stepped impedance resonator
dual band
bandpass filter