期刊文献+

基于计算流体力学3D动态模拟技术的PLACS系统推介 被引量:3

Introduction of PLACS system based on 3D dynamic simulation technologyof computational fluid dynamics
下载PDF
导出
摘要 1999年,20多个国家在美国旧金山举行的"有害物质意外释放后果模拟国际研讨会"上,广泛讨论了危险化学品泄漏、火灾、爆炸事故的风险及后果评估问题.会上,多数研究机构都展示了以"计算流体力学"(computational fluid dynamics,CFD)3D动态模拟技术进行风险及后果评估的效果.由于该技术可以显示各工作层面、各方位、各角度及各时间下的气云浓度、火焰温度及爆炸压力等参数状况,CFD模拟因此将会成为新一代风险及后果评估的主流技术.目前,有关火灾、爆炸或毒性物质外泄的CFD模拟,约90%是由基于此技术的软件系统完成的.
作者 葛晓军
出处 《安全与环境学报》 CAS CSCD 2003年第6期76-76,共1页 Journal of Safety and Environment
  • 相关文献

同被引文献26

  • 1吕东,王婕,李晋.10万m^3外浮顶罐低液位时罐内油气爆炸研究[J].工业安全与环保,2013,39(2):50-52. 被引量:4
  • 2刘国梁,宣捷,杜可,赵汝敖.重烟羽扩散的风洞模拟实验研究[J].安全与环境学报,2004,4(3):27-32. 被引量:27
  • 3邵辉,施志荣,朱其良.季节趋势模型在气体泄漏扩散模拟预测中的应用[J].中国安全科学学报,2006,16(6):30-34. 被引量:3
  • 4张维凡,张希贤.重要有毒物质泄漏扩散模型研究[J].化工劳动保护(安全技术与管理分册),1996(3):1-19. 被引量:55
  • 5H.Scifert,H.Giesbrecht,W.Leuckel.Dispersion of heavy gases and single-and two-phase vapors escaping from vertical outlets[J].Ger.Chem.Eng,1984,7(2):126-136.
  • 6W.J.Hague,W.Pepe.Flow chamber simulations of aerosol formation and liquid jet breakup for pressurized releases of hydrogen fluoride[J].Plant Operations Progress,1990,9(2):125-130.
  • 7E.Hervieu,T.Veneau.Experimental determination of the droplet size and velocity distributions at the exit of the bottom discharge pipe of a liquefied propane storage tank during a sudden blowdown[J].Journal of Loss Prevention in the Process Industries,1996,9(6):413 -425.
  • 8J.T.Allen.Laser-based measurements in two-phase flashing propane jets.Part one:velocity-profiles[J].Journal of Loss Prevention in the Process Industries,1998,11(5):291 -297.
  • 9J.T.Allen.Laser-based measurements in two-phase flashing propane jets.Part two:droplet size distribution[J].Journal of Loss Prevention in the Process Industries,1998,11(5):299-306.
  • 10Vasilis M.Fthenakis.HGSYSTEM:A Review,Critique,and Comparison with other models[J].Journal of Loss Prevention in the Process Industry,1999,12(6):525 -531.

引证文献3

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部