Heat Transfer Model with Two Heat Transfer Coefficients Along a M ultiperforated Plate-Application to Combustion Chamber Wall Cooling

Walls' cooling of aeronautic propeller combustion chamber is performed with the injection, through the combustion chamber wall, of a part of the air coming from compressors placed upstream. Measurements of the wall thermal fields are made by infrared thermography along the injection wall. This injection wall is pierced by 9 rows of 8 holes (α=90°) in staggered configuration (p/D=s/D=6). We propose a model using two heat transfer coefficients to represent the convective exchanges. The results are non-dimensioned and presented in comparison with the case without holes. The use of this model allows us to define 4 zones. Those 4 zones exist for the 5 blowing rates.