期刊文献+

超声疲劳试验方法在40Cr钢疲劳性能研究中的应用 被引量:13

Fatigue Behavior of 40Cr Steel in Ultrasonic Fatigue Testing
下载PDF
导出
摘要 用超声疲劳试验方法(频率为20kHz)测定40Cr钢在105~1010周次范围内的疲劳寿命(S N)曲线。结果表明,40Cr钢的疲劳寿命(S N)曲线在105~1010周次范围内始终保持下降趋势,在106周次以上没有水平段。超高频疲劳载荷下的S N曲线同样能用Basquin关系式描述。与常规频率下的疲劳性能相比,高频载荷下的疲劳强度增加。20kHz循环载荷下,40Cr钢107周次的疲劳强度为443MPa,1010周次时为235MPa。 The stress-cycle (S-N) curve of 40Cr steel between 10~6 and 10^(10) cycles were tested by ultrasonic fatigue method at a frequency of 20kHz. The results showed that the stress-cycle (S-N) curve of 40Cr steel decreased with increasing number of cycles between 10~6-10^(10)cycles. It was found that the stress-cycle (S-N) curve generally exhibited no plateau beyond 10~6 cycles. In comparison with conventional fatigue testing, high frequency loading raised the fatigue strength of 40Cr. Under 20kHz high frequency loading, fatigue strength of 40Cr steel at 10~7 cycles was found to be 443 MPa, and at 10~910) cycles to be 235MPa.
作者 王弘 高庆
出处 《机械工程材料》 CAS CSCD 北大核心 2003年第12期29-31,共3页 Materials For Mechanical Engineering
基金 四川省应用基础研究基金资助项目(02GY029 028)
关键词 40CR钢 超声疲劳试验 疲劳强度 力学性能 40Cr steel ultrasonic fatigue fatigue strength
  • 相关文献

参考文献1

  • 1工程材料实用手册编委会.工程材料实用手册(第一卷)[M].北京:中国标准出版社,1988.272.

同被引文献104

引证文献13

二级引证文献58

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部