摘要
用PACS为絮凝剂处理含油废水,研究了PACS絮凝剂的絮凝效果及影响絮凝效果的因素,并通过试验确定了当PACS的加入量为3～5mg/L,pH值控制在6～9,SO2-4加入量为12～15(摩尔比),碱化度为70%时,对含油废水的处理效果最好.
With PACS taken as a flocculent to treat waste water containing oil,this paper studies the flocculation effect of PACS flocculent and the factors affecting flocculation effect.Through experiments,it is determined that when adding amount of PACS is 3~5mg/L,with pH value at 6～9,adding amount of SO42- at 12-15(mole ratio)and alkalinity at 70%,the best treatment effect is achieved.
出处
《中国井矿盐》
CAS
北大核心
2004年第1期35-37,共3页
China Well and Rock Salt
关键词
PACS
絮凝剂
废水处理
絮凝效果
工业废水
含油废水
Aluminium chloride polysulfide
waste water containing oil
flocculent
flocculation effect
