期刊文献+

陶瓷粉填充聚合物基过电流保护元件的电性能 被引量:5

Electrical Properties of Over-current Protectionon Polymeric Component Filled by Ceramic Powder
下载PDF
导出
摘要 研究了陶瓷粉填充聚合物基过电流保护元件的导电性能、电阻-温度特性及微观形貌。随着陶瓷粉体积分数的增加,过电流保护元件的电阻逐渐降低;当陶瓷粉体积分数达到某一临界点时,过电流保护元件的电阻急剧下降;继续增加陶瓷粉体积分数,过电流保护元件的电阻的减小趋势变缓。随着温度的升高,过电流保护元件的电阻率逐渐增加;当温度接近聚合物熔融温度Tm时,导电网络被破坏,过电流保护元件的电阻率会大幅增加,产生电阻正温度效应;超过Tm后,过电流保护元件一直处于高阻状态。 The conductivity properties,resistance-temperature characteristic and microstructure of over-current protection on polymeric component filled by ceramic powder are investigated. The resistance of the over-current protection component decreases slowly with the increasing content of ceramic powder,and then decreases rapidly when the content of ceramic powder reaches a critical value. The resistivity of the over-current protection component increases slowly with the increasing temperature,and then increases rapidly when the temperature reaches the melting temperature of the polymer because of the destruction of the conductive networks.
作者 杨铨铨 王军
出处 《仪表技术》 2015年第4期8-11,54,共5页 Instrumentation Technology
关键词 陶瓷粉 过电流保护元件 电性能 ceramic powder over-current protection component electrical properties
  • 相关文献

参考文献6

  • 1郑强,税波,沈烈.炭黑填充多组分高分子导电复合材料的研究进展[J].高分子材料科学与工程,2006,22(4):15-18. 被引量:25
  • 2Yuan Qiang,Wu Dong Yang,Bateman Stuart,Shen Shirley Zhiqi,Gloria-Esparza C.,Xia K..Effect of Processing Method on Conductivity and Mechanical Properties of Glass Fibre Reinforced Carbon Black Filled Polyethylene[J]. Advanced Materials Research . 2008 (32)
  • 3Hou, Yan Hui,Zhang, Ming Qiu,Rong, Min Zhi,Yu, Gang,Zeng, Han Min.Improvement of conductive network quality in carbon black-filled polymer blends. Journal of Applied Polymer Science . 2002
  • 4Chou, Hsoung-Wei,Huang, Jong-Shin,Lin, Shih-Ting.Effects of thermal aging on fatigue of carbon black-reinforced EPDM rubber. Journal of Applied Polymer Science . 2007
  • 5Park,Eun-Soo.Resistivity and thermal reproducibility of high-density polyethylene heaters filled with carbon black. Macromolecular Materials and Engineering . 2006
  • 6Zoldan, J.,Siegmann, A.,Narkis, M.Anisotropy in the electrical behavior of immiscible polypropylene/nylon/ carbon black blends processed slightly below the melting temperature of the nylon. Polymer Engineer . 2006

二级参考文献32

  • 1周剑锋,宋义虎,郑强,吴刚,沈烈.短碳纤维填充HDPE复合体系的渗流网络与压阻行为[J].高等学校化学学报,2004,25(7):1338-1341. 被引量:6
  • 2Wu G Z, Asai S, Sumita M. Macromolecules, 2002,35: 945.
  • 3张福强(ZHANGFu-ming).塑料,1995,24(2):7-7.
  • 4Bemmtt G S, et al. Polymer, 1991, 9: 1633.
  • 5Yacubowicz J, Narkis M, Polym, Eng. Sci, , 1986, 26(22): 1568.
  • 6Feng J Y, Chan C M. Polym. Eng. Sci. , 1999, 39(7) :1207.
  • 7宋义虎(SONGYi-hu) 郑强(ZHENGQiang) 益小苏(YIXiao—su).材料研究学报,2000,14(2):141-141.
  • 8Gubbels F, Blacher S, Vanlathem E, et al. Macromolecules, 1995, 23:1559.
  • 9Walters S M, Keyte H N, Trans. Inst. I. R. I. , 1962,38: 40.
  • 10Sumita M, Sakata K, Asai S, et al. Polym. Bull. ,1991, 25: 265.

共引文献24

同被引文献9

引证文献5

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部