期刊文献+

107硅橡胶接枝甲基MQ硅树脂及其在硅脂中的应用 被引量:2

Dihydroxy Polydimethyl Siloxane Grafted Methyl MQ Silicone Resin and its Application in Silicone Grease
下载PDF
导出
摘要 以甲基MQ硅树脂、甲基三丁酮肟基硅烷、二羟基聚二甲基硅氧烷等为原料,制得107硅橡胶接枝甲基MQ硅树脂的接枝组合物。再以此为基础聚合物,添加氧化铝、氧化锌、氮化硼等制得导热硅脂。107硅橡胶接枝甲基MQ硅树脂的较佳配方为:200份甲基MQ硅树脂、15份甲基三丁酮肟基硅烷、2 000份二羟基聚二甲基硅氧烷、18份超纯水,恒温反应15 h。采用500份该接枝组合物、2 000份氧化铝、1000份氧化锌、400份氮化硼、200份六甲基二硅氮烷制得导热硅脂,热导率3.1 W/(m·K)、体积电阻率3×10^(13)Ω·cm、针入度265(1/10 mm)、挥发分质量分数0.32%、油离度为0.02%。 The grafting composition was synthesis with methyl MQ silicone resin as the raw materials,methyltrissilane and dihydroxy polydimethyl siloxane.And then,the thermal grease was prepared with the grafting composition as the base polymer,aluminum oxide,zinc oxide and boron nitride as the filler.Results showed that better formulation of the grafting composition is methyl MQ silicone resin of 200 phr,methyltrissilane of 15 phr,dihydroxy polydimethylsiloxane of 2000 phr and ultrapure water of 18 phr,reaction for 15 hours in the constant temperature.The preparation of thermal grease was 500 phr of the grafted combination,2000 parts of aluminum oxide,1000 parts of zinc oxide,400 phr of boron nitride,and 200 phr of hexamethyldisilazane.The thermal grease had the thermal conductivity of 3.1W/(m·K),volume resistivity of3×10^(13)Ω·cm,penetration of 265~1/_(10)mm,volatile quality fraction of 0.32%,with low degree of the oil dispersion was 0.02%.
出处 《有机硅材料》 CAS 2018年第S1期46-49,共4页 Silicone Material
关键词 甲基MQ硅树脂 接枝组合物 导热硅脂 油离度 methyl MQ silicone resin graft composition thermal silicone grease low oil dispersion
  • 相关文献

参考文献2

二级参考文献10

  • 1曾理,陈文媛,谢诗文,杨邦朝.集成电路封装高密度化与散热问题[J].电子与封装,2006,6(9):15-21. 被引量:13
  • 2[1]Washio Juichi, Takei Hiroshi, Shindo Toshihiko. Heatconductive silicone rubber products and their manufacture. 日本,特开平 07-41675. 1995
  • 3[2]Nielson L E. Generalized equation for the elastic moduli of composite materials. J Appl Phys, 1970, 41: 4626
  • 4祝渊,陈克新,金海波,傅仁利.β-Si_3N_4/环氧树脂电子模塑料的导热性能研究[J].无机材料学报,2007,22(6):1201-1205. 被引量:9
  • 5Zhou Wenying. . 2007
  • 6Haggerty J S,Lightfoot A. Ceramic Engineering and Science Proceedings . 1995
  • 7Bujard P,Kuhnlein G,Ino S,Shiobara T.Thermal conductivity of molding compounds for plastic packaging. IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A . 1994
  • 8Stauffer,D.,Aharony,A. Introduction to percolation theory . 1992
  • 9Agari Y,Uno T.Estimation on thermal conductivities of filled polymer. Journal of Applied Polymer Science . 1986
  • 10汪雨荻,周和平,乔梁,陈虎,金海波.AlN/聚乙烯复合基板的导热性能[J].无机材料学报,2000,15(6):1030-1036. 被引量:68

共引文献74

同被引文献10

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部