摘要
电解槽中的阳极板要定期拍平,将阳极板吸附的阳极泥拍去,根据生产工艺,确定控制流程,并编写PLC程序,仿真测试成功,说明PLC程序正确。
The anode plate in the electrolytic cell should be flattened regularly,so the adsorbed sludge will be removed. According to the production process,the control flow is determined,and the PLC program is written. The simulation test shows that the PLC program is correct.
出处
《有色设备》
2017年第6期38-40,共3页
Nonferrous Metallurgical Equipment
关键词
PLC
锌冶炼
拍平机
PLC
zinc smelting
flattening machine
