期刊文献+

Cavitation erosion behavior of nickel-aluminum bronze weldment 被引量:1

Cavitation erosion behavior of nickel-aluminum bronze weldment
下载PDF
导出
摘要 Cavitation erosion behavior of nickel-aluminum bronze(NAB) weldment in 3.5% NaCl aqueous solution was studied by magnetostrictive vibratory device for cavitation erosion. The results show that cavitation erosion resistance of the weld zone(WZ) of the weldment is superior to that of the base metal. SEM observation of eroded specimens reveals that the phases undergoing selective attack by the stress of cavitation erosion at the early stage of cavitation erosion are: martensite in the WZ, α phase in the heat-affected zone(HAZ) and eutectoidal phase in the base metal; the microcracks causing cavitation damage initiate at the phase boundaries. Cavitation erosion behavior of nickel-aluminum bronze(NAB) weldment in 3.5% NaCl aqueous solution was studied by magnetostrictive vibratory device for cavitation erosion. The results show that cavitation erosion resistance of the weld zone(WZ) of the weldment is superior to that of the base metal. SEM observation of eroded specimens reveals that the phases undergoing selective attack by the stress of cavitation erosion at the early stage of cavitation erosion are: martensite in the WZ, α phase in the heat-affected zone(HAZ) and eutectoidal phase in the base metal; the microcracks causing cavitation damage initiate at the phase boundaries.
出处 《中国有色金属学会会刊:英文版》 CSCD 2003年第6期1317-1324,共8页 Transactions of Nonferrous Metals Society of China
基金 Project((11H1004)supportedbytheNationalDefenceFoundationofChina
关键词 青铜 空蚀 TIG焊 焊接热影响区 SEM NAB weldment tungsten inert gas welding(TIG) cavitation erosion
  • 相关文献

参考文献15

  • 1[1]Karimi A,Martin J L.Cavitation erosion of materials [J].Int Met Rev,1986,31(1):1-26.
  • 2[2]Budiski K G.Surface Engineering for Wear Resistance [M].New York:Prentice Hall,1988.24-26.
  • 3[3]Clews K J.Evaluated temperature properties of aluminum bronze(alloy D) parent metal rod and weld metal[J].British Welding Journal,1966,13(8):476-483.
  • 4[4]Clews K J.Metallurgical aspect of aluminum bronze welding problems[J].British Welding Journal,1965,12(3):126-144.
  • 5[5]Foster M L,Goldspiel S.Weldable as-cast nickel aluminum bronze-composition and microstructure [J].AFS Trans,1961,69:80-100.
  • 6[6]Sahoo M.Weldability of nickel-aluminum bronze alloy C95800[J].AFSTrans,1982,90:893-911.
  • 7[7]Sadayappan M,Letts M W,Sahoo M.Simulation of weld cracking in heat affected zone of aluminum bronze alloy C95800[J].AFS Trans,2000,108:725-732.
  • 8[8]Zanis C A,Ferrara R J.An investigation into dealloying of cast Ni-Al bronze[J].AFS Trans,1972,80:259-267.
  • 9[9]Zanis C A,Ferrara R J.Sea water corrosion of nickelaluminum bronze[J].AFS Trans,1974,82:71-78.
  • 10[10]Lorimer G W,Hasan F,Iqbal J,et al.Observation of microstructure and corrosion behavior of some aluminum bronzes[J].British Corrosion J,1986,21(4):244-248.

同被引文献11

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部