期刊文献+

基体合金元素对SiC_p/Al复合材料热循环尺寸稳定性的影响 被引量:1

Effects of Elements in Matrix on Dimensional Stability of SiC_p/Al Composite During Thermal Cycle
下载PDF
导出
摘要 研究了含有不同合金元素铝基体的SiCp/Al系复合材料在温度循环变化时的尺寸稳定性。研究结果表明,基体中加入镁元素对复合材料的尺寸稳定性不利,并且Al-Mg基复合材料不能经过预循环热处理来改善其尺寸稳定性。Al-Si基体的复合材料尺寸稳定性较好,且可以通过预循环热处理提高其尺寸稳定性。三元基体的复合材料有较好的尺寸稳定性。 Dimensional stability of SiCp reinforced composites based on different matrix elements during thermal cycling has been studied.Results show that adding magnesium to the aluminum matrix is not good to the dimensional stability of the composite.And it is quite impossible to improve the dimensional stability by pre thermal cycling on the AlMg matrix composite.AlSi matrix composite has a good dimensional stability,and pre thermal cycling can improve its dimensional stability.Composite based on three elements matrix (AlMgCu) shows an excellent dimensional stability.
出处 《热加工工艺》 CSCD 北大核心 2003年第4期11-12,14,共3页 Hot Working Technology
关键词 SICP/AL复合材料 尺寸稳定性 基体合金元素 热循环 SiC_p/Al composites dimensional stability matrix elements thermal cycling
  • 相关文献

参考文献11

二级参考文献36

  • 1王鸿华,李贤淦,吴人洁.T300/LD2热循环时产生滞后环原因及改善方法探讨[J].复合材料学报,1990,7(3):35-41. 被引量:2
  • 2徐文娟.硅酸铝(氧化铝)增强ZL109铝合金复合材料的热循环行为:[硕士学位论文].南京:东南大学,1999..
  • 3李志林,硕士学位论文,1991年
  • 4张力宁,金属学报,1990年,26卷,B208页
  • 5朱平,金属学报,1989年,25卷,B410页
  • 6黄辉,光学机械,1986年,2卷,39页
  • 7张国定,自然科学进展,1994年,4卷,6增刊,765页
  • 8束德林,金属力学性能,1987年,67页
  • 9李承欧,硬度试验科学及其应用(译),1987年,51页
  • 10武高辉,复合材料学报,1998年,15卷,3期

共引文献60

同被引文献73

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部