期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

不锈钢/铝(合金)/不锈钢多层复合板的冲压成型性能 被引量：2

Numerical simulation of deep drawing procedure of stainless steel/aluminum alloy/stainless steel composite
下载PDF
导出
摘要 通过实验测量了不锈钢/铝合金/不锈钢三层复合板和不锈钢/铝/铝合金/铝/不锈钢五层复合板的各项成型性能指标,并采用刚塑性有限元方法对这2种复合板在有压边力条件下的冲压成型过程进行了计算模拟分析,获得了各组元金属的变形规律以及等效应力、应变分布图。分析结果证明:五层复合板的冲压成型性能要优于三层复合板。 The forming properties of the stainless steel/aluminum/stainless sandwich sheets and the stainless steel/aluminum/aluminum alloy/aluminum /stainless steel fivelayer sheets were measured, and the deep drawing procedures of them were also analyzed by FEM. The distributions of effective strain and stress of the component metals were achieved. The simulation results show that the formability of fivelayer composite is higher than that of threelayer composite. This conclusion is coincident with the experimental data.
作者 朱旭霞 彭大暑 黎祚坚
机构地区 宁波高等专科学校机械系 中南大学材料科学与工程学院 广东工业大学材料科学与工程系
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2003年第4期914-918,共5页 The Chinese Journal of Nonferrous Metals
关键词 不锈钢 铝合金 多层复合板 冲压 数值模拟 有限元法 复合材料 成型性能 formability numerical simulation FEM composite stainless steel aluminum alloy
分类号 TB331 [一般工业技术—材料科学与工程] TG389 [金属学及工艺—金属压力加工]
  • 相关文献

参考文献11

  • 1[2]Mori T, Kurimoto S. Press-forming of stainless steel and aluminum clad sheet[J]. J Mater Proc Tech, 1996, 56: 242-254.
  • 2[3]Jeswiet J, Cao Xiaokong. The effect of aspect ratio upon friction and normal forces in strip rulling[J]. J Mater Proc Tech, 1994, 45: 99-104.
  • 3[4]Takuda H, Mori K, Fujimoto H, et al. Prediction of forming limit in deep forming of Fe/Al laminated composite sheets using ductile fracture criterion[J]. J Mater Proc Tech, 1996, 60: 291-296.
  • 4[5]Ramaekers J, Kals J. Mathematical representation of friction in metal forming analysis[J]. Annals of CIRP, 1986, 35: 137-140.
  • 5[6]Kapinski S. Analytical and experimental analysis of deep drawing process for bimetal elements[J]. J Mater Proc Tech, 1996, 60: 197-200.
  • 6[7]Segawa A, Kawanami T. Rolling-deforming characteristic of clad materials determined by model experiments and numerical simulation of numerical simulation of clad rolling by the rigid-plastic FEM[J]. J Mater Proc Tech, 1995, 53: 544-551.
  • 7[8]Rees D W A, Power R K. Forming limits in a clad metal[J]. J Mater Proc Tech, 1994, 45: 571-575.
  • 8[9]Szulc W, Pietrzyk M, Kyja H, et al. Theoretical and experimental analysis of drawing of sheet rods covered with copper[J]. J Mater Proc Tech, 1994, 45: 401-406.
  • 9[10]Richelsen A B. Numerical analysis of asymmetric rolling accounting for differences in friction[J]. J Mater Proc Tech, 1994, 45: 149-154.
  • 10[11]Petty D M. Friction models for finite element modeling[J]. J Mater Proc Tech, 1994, 45: 7-12.

同被引文献31

  • 1冯世杰,梁伟,薛晋波.AZ91D镁合金表面真空蒸镀锌铝复合涂层的研究[J].稀有金属,2010,34(5):678-683. 被引量：4
  • 2董运涛,张家毓,李选明.钛/钢双金属的可控气氛热复合工艺初探[J].稀有金属材料与工程,2012,41(S2):141-144. 被引量：5
  • 3祖国胤,王宁,于九明,温景林.TLP连接技术在不锈钢-3003铝合金复合板制备中的应用[J].中国有色金属学报,2005,15(1):79-83. 被引量：5
  • 4Renji K, Shankar N S. Loss factors of composite honeycomb sandwich panels[J]. Journal of Sound and Vibration, 2002, 250(4): 745-761.
  • 5Cise D, Lakes R S. Moisture ingression in honeycomb core sandwich panels[J]. Journal of Materials Engineering and Performance, 1997, 6(6): 732-736.
  • 6Davies G O, Hitchings D, Besant T, et al. Compression after impact strength of composite sandwich panels[J]. Composite Structures, 2004, 63(1): 1 - 9.
  • 7Daurelio G, Ludovico A, Nenci F, et al. Thin stainless steel sandwich structural panels all welded by laser technology[A]. Proceedings of SPIE - The International Society for Optical Engineering[C]. Tsukuba Japan, 1997. 184-211.
  • 8Soutis C, Spearing S M. Compressive response of notched, woven fabric, face sheet honeycomb sandwich panels[J]. Plastics Rubber and Composites, 2002, 31(9): 392-397.
  • 9Toribio M G, Spearing S M. Compressive response of notched glass-fiber epoxy/honeycomb sandwich panels[J]. Composites - Part A:Applied Science and Manufacturing, 2001, 32(6): 859-870.
  • 10Narayana K B, Ramanath K S, Bonde D H. Modelling honeycomb sandwich panels with shell elements in fi-nite element analysis[J]. Journal of Spacecraft Technology, 1995, 5(3): 33.

引证文献2

二级引证文献10

中国有色金属学报
2003年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部