期刊文献+

X20CrMoV12.1钢长期高温时效的逆回火脆性研究 被引量:4

STUDY ON REVERSE TEMPER EMBRITTLEMENT OF X20CrMoV12.1 STEEL FOR LONG-TERM HIGH TEMPERATURE AGEING
下载PDF
导出
摘要 X2 0CrMoV12 .1耐热合金钢是热电厂主蒸汽管线的主要用材之一。该管材经 16×10 4 h长期高温载荷运行后 ,性能明显退化 ,常温下呈完全脆性状态。试验结果表明 ,管材的脆化是可逆的 ,属于逆回火脆现象。运用透射电镜和俄歇电子能谱等方法对其显微组织结构进行了研究 。 X20CrMoV12.1heat resistant alloy steel is one of the materials for the main steam pipes in power plants. After service at elevated temperatures for 160,000 hours, its properties degraded obviously and become brittle at room temperature. The presect study shows that embrittlement of the steel for long term elevated temperature ageing is attributed to reverse temper embrittlement (RTE) effect. The microstructural characterization for the degraded steel was done with TEM and AES, and the results show that the spheridization and coarsening of carbides, and the segregation of harmful element P at prior austenite boundaries result in the property degradation and embrittlement of the steel.
出处 《理化检验(物理分册)》 CAS 2003年第5期225-228,共4页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 耐热钢 高温时效 逆回火脆 晶界偏析 碳化物粗化 透射电镜 俄歇电子能谱 显微组织结构 X20CrMoV12.1 steel High temperature ageing Reverse temper embrittlement Segregation on grain boundary Coarsening of carbides
  • 相关文献

参考文献6

  • 1Bendick W, Harrmann K, Wellnitz G, et al. Properties of 9 to 12% Chromium Steels and Their Behavior Under Creep Conditions [J]. VGB Kraftwerkstechnik,1993,73:73--9.
  • 2DIN17175, Nahtlose Rohre aus warmfestern Staehlen [S].
  • 3Patriarca P, et al. U.S. Advanced Materials Development Program for Steam Generators [J]. Nuclear Technology, 1976,28(3): 516-37.
  • 4胡正飞,杨振国.长期高温时效F12耐热合金钢中碳化物形态和组分变化[J].金属学报,2003,39(2):131-135. 被引量:20
  • 5Strang A, Vodarek V. Effects of microstructural stability on the creep properties of high temperature martensite 12Cr steels [A]. Proceedings of the International Conference on Creep and Fracture of Engineering Materials and Structures, Aug 10-15 1997[C]. Berlin: Minerals, Metals & Materials Soc (TMS), 415-425.
  • 6Hahn B, Bendick W. Erfahrungen aus der Zustandsbewertung eines FD-und HZU-Rohrleitungssystems aus dem Werkstoff X20CrMoV12. 1 nach einer Betriebszeit von ueber 180000h [J]. VGB KraftwerksTechnik,2000,11:85-90.

二级参考文献2

共引文献19

同被引文献26

  • 1王为民,王建录.高效超临界汽轮机的研究与开发[J].动力工程,2004,24(5):609-613. 被引量:11
  • 2范华,杨功显.超临界与超超临界汽轮机组用材[J].东方电气评论,2005,19(2):90-97. 被引量:28
  • 3沈邱农,杨连海.大型超超临界机组的自主化开发[J].热力透平,2005,34(3):133-137. 被引量:9
  • 4于在松,刘江南,王正品,石崇哲,王弘喆,金耀华.T91钢服役过程中碳化物的熟化分析[J].铸造技术,2007,28(5):635-638. 被引量:19
  • 5崔忠忻.金属学与热处理[M].北京:机械工业出版社,2007.
  • 6Taneike M, Sawada K, Abe F. Effect of Carbon Concentration on Precipitation Behavior of M23 C6 Carbides and MX Carbonitrides in Martensitic 9Cr Steel During Heat Treatment [J]. Metallurgical and Materials Transactions A,2004(4) :1255.
  • 7Abe F, Taneike M, Sawada K. Alloy Design of Creep Resistant 9Cr Steel Using a Dispersion of Nano-Sized Carbonitrides [J]. Pressure Vessels and Piping, 2007 (84) : 3.
  • 8波波娃 H M.钢的碳化物分析[M].北京:机械工业出版社,1959.
  • 9Raluca V, Eric A, Dominique P, et al, Microstructure Evolution of HP40-Nb Alloys During Aging Under Air at 1 000 ℃[J] Materials Characterization,2009(60) :1020.
  • 10Kaneko K, Matsumura S. Characterization of Carbides at Different Boundaries of 9Cr-Steel [J]. Materials Science and Engineering, 2004(374) : 82.

引证文献4

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部