期刊文献+

TiAl基合金加工材中显微组织对性能的调整 被引量:1

Microstructure investigation of the dise of Ti-17 alloy
下载PDF
导出
摘要 用光学显微镜和TEM对Ti—17合金饼材的显微组织进行了研究。饼材中存在的形态不同的两类显微组织都由α+β两相组成。然而,在长宽比很大的相互平行的魏氏α片内观察到了3种α变体,它们是与母体Burgers。α相关联的(1011)和(1012)孪晶,也是Ⅰ型α向Ⅱ型α转变的产物。 Microstructure was studied for Ti-17 alloy by the highlight microscope and TEM. The two types of microstructures were observed in the disc. Both consisted of α and β phase but with variant morphohgy. Howerer, three variants were observed in the collateral widmanstatten α dates with a very big ratio of length to width,which were the twins of (1011) and (1012) related to burgers α phase, and from Type Ⅰ α to type Ⅱ α.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 1992年第2期17-21,共5页 Rare Metal Materials and Engineering
关键词 饼材 显微组织 α变体 孪晶 钛合金 Ti-17, disc, microstructure, α variants, twin
  • 相关文献

同被引文献3

  • 1董洁,李渭清,冯永琦,谢仁沛,张永强,高慧.锻造工艺对TC11饼材显微组织的影响[J].稀有金属快报,2006,25(11):26-31. 被引量:4
  • 2陈可越.钛、钛合金与钛合金制品生产新技术新工艺流程及质量检验新标准使用手册[M]银川:宁夏大地音像出版社,2005.
  • 3张翥;王群骄;莫畏.钛的金属学和热处理[M]{H}北京:冶金工业出版社,2009.

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部