圆柱外直齿轮盘刀包络铣削方法
Envelope milling method of cylindrical external spur gear disc tools
摘要
针对圆柱外齿轮精加工铣齿刀盘无法通用的问题,提出了一种通用盘刀包络铣削方法。这是一种高效、高精、柔性的精加工方法。本文论述了通用盘刀包络铣削原理和刀具轨迹计算方法。
出处
《世界制造技术与装备市场》
2019年第4期59-60,共2页
World Manufacturing Engineering & Market
二级参考文献12
-
1LUO Shanming, WU Yue, WANG Jian. The generation principle and mathematical models of a novel cosine gear drive[J]. Mechanism and Machine Theory, 2008, 43( 12): 1543-1556.
-
2LITVIN F L, FUENTES A. Gear geometry and applied theory[M]. Cambridge: Cambridge University Press, 2004.
-
3WU Daren, LUO Jiashun. A geometric theory of conjugate tooth surfaces[M]. Singapore: World Scientific, 1992.
-
4DOONER D B, GRIFFIS M W. On spatial Euler-Savary equations for envelopes[J]. Journal of Mechanical Design, 2007, 129(8): 865-875.
-
5PUCCIO F D, GABICCINI M, GUIGGIANI M. Generation and curvature analysis of conjugate surfaces via a new approach[J]. Mechanism and Machine Theory, 2006, 41(4): 382-404.
-
6CHEN C K, CHIOU S T, FONG Z H, et al. Mathematical model of curvature analysis for conjugate surfaces with generalized motion in three dimensions[J]. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 2001,215(4): 487-502.
-
7CHEN Yangzhi, LIU X, CHETWYND D G, et al. Investigation of a novel elastic- mechanical wheel transmission under light conditions[J]. Mechanism and Machine Theory, 2008, 43(11): 1462-1477.
-
8WAN Jiafu,LI Di,ZHANG Ping.Key Technology of Embedded System Implementation for Software-based CNC System[J].Chinese Journal of Mechanical Engineering,2010,23(2):217-224. 被引量:3
-
9唐进元,周炜,陈思雨.齿轮传动啮合接触冲击分析[J].机械工程学报,2011,47(7):22-30. 被引量:89
-
10陈兵奎,李海翔.渐开弧面齿轮的形成原理及数学模型[J].机械工程学报,2012,48(3):57-62. 被引量:8
共引文献29
-
1陈兵奎,梁栋,彭帅,覃思玲,张建州.共轭曲线齿轮啮合管齿面的几何及接触特性分析[J].西安交通大学学报,2015,49(3):85-94. 被引量:6
-
2梁栋,陈兵奎,高艳娥.Calculation method of sliding ratios for conjugate-curve gear pair and its application[J].Journal of Central South University,2015,22(3):946-955. 被引量:3
-
3崔高尚,范元勋.基于正弦基准齿形的齿轮共轭齿廓设计与分析[J].机械传动,2015,39(8):59-62. 被引量:1
-
4华成丽.剃齿变形量计算与刀具修形曲线拟合应用[J].机械研究与应用,2017,30(3):109-111.
-
5杨建宏.齿轮传动啮合接触冲击分析[J].内燃机与配件,2017(7):75-76. 被引量:1
-
6何恩义.交叉轴线齿轮无侧隙齿廓构建机理研究[J].机械传动,2017,41(9):41-44.
-
7何恩义.一种平行轴圆截面线齿轮齿廓的构建方法[J].机械传动,2017,41(10):60-64. 被引量:1
-
8杜义贤,王成,杜大翔,田启华.基于共轭原理的棒铣刀铣削直齿齿轮的轨迹规划[J].机械设计,2017,34(9):43-47.
-
9李阁强,张龙飞,韩伟锋,邓效忠,冯勇.双圆弧斜齿齿轮泵脉动特性分析及齿形设计[J].中国机械工程,2018,29(2):186-192. 被引量:22
-
10王家祥,杨向红,孙建军.螺杆数学模型及数控加工铣刀廓形求解[J].机械管理开发,2018,33(1):1-4. 被引量:2
-
1张玲玲.变位系数在齿轮设计中的应用[J].内燃机与配件,2019(16):143-144. 被引量:3
-
2索尔维Torlon^■ PAI使用于复合材料清洁的刮刀产品更耐用、更安全[J].现代塑料,2019,0(4):16-16.
-
3陈志,杨彪,李潮伟,何静.影响核设备焊接质量坡口现场加工工艺研究[J].电焊机,2019,49(5):23-26.
-
4冯正玖,靳广虎,朱如鹏.基于LTCA的直齿轮啮合刚度的计算与分析[J].机械传动,2019,43(8):78-83. 被引量:8
-
5周云戈.老家凉水饭儿[J].吉林劳动保护,2018(10):45-45.
-
6赵文昌,任聪.基于ANSYS的拉削定位面优化设计[J].汽车实用技术,2019,0(16):74-75.
-
7苏展.Matlab优化刀具在数控机床刀盘上的分布[J].装备制造技术,2019,0(6):194-196.
-
8周文波,吴惠明,赵峻.泥岩地层常压刀盘盾构的掘进策略与分析[J].现代隧道技术,2019,56(4):8-15. 被引量:10
-
9张田,韩军.基于UG与VERICUT电风扇叶轮模具三轴数控加工仿真[J].科技创新导报,2019,16(12):135-138. 被引量:5
-
10罗超,苏靖惟,张文增.共圆滑杆直线平夹自适应机器人手的研制[J].机器人,2019,41(4):519-525. 被引量:8