期刊文献+

工业固废制备陶粒的机理探讨 被引量:3

Study on the mechanism of ceramsite prepared with solid wastes
原文传递
导出
摘要 综述了利用固体废物制备陶粒时成球、烧制以及烧成三个阶段的反应机理,分析了陶粒的原料成分、成分含量、烧制和烧成制度等因素对陶粒颗粒密度、堆积密度、吸水率等性能的影响,对寻找制备陶粒的最佳工艺参数具有指导意义,为固体废弃物的资源化利用提供了参考。 The reaction mechanisms of raw pellets,firing and sintering of the preparation of ceramsite by solid wastes were summarized.The influence of main factors such as the components and proportion of raw materials,firing and sintering system on the performance of ceramsite like grain density,bulk density,bibulous rate and so on were discussed,which not only has instructional effect on finding the optimum technology parameters of preparing ceramsite but also has provided a reference for the solid wastes utilization.
出处 《中国废钢铁》 2015年第5期18-22 17,17,共6页 Iron & Steel Scrap of China
关键词 固体废弃物 陶粒 机理 solid wastes ceramsite mechanism
  • 相关文献

参考文献7

  • 1岳东亭.利用污泥/赤泥/钢渣等固体废物制备新型多孔陶粒的膨胀机理研究[D].山东大学2014
  • 2高明磊.利用钢渣制备陶粒的实验研究[D].东北大学2010
  • 3毛锡双.超轻页岩陶粒的制备及焙烧机理研究[D].广西大学2006
  • 4Yu-Ling Wei,Jing-Chiang Yang,Yong-Yang Lin,Shih-Yu Chuang,H. Paul Wang.Recycling of harbor sediment as lightweight aggregate[J]. Marine Pollution Bulletin . 2008 (6)
  • 5J.L. Zou,G.R. Xu,G.B. Li.Ceramsite obtained from water and wastewater sludge and its characteristics affected by Fe 2 O 3 , CaO, and MgO[J]. Journal of Hazardous Materials . 2008 (1)
  • 6C.R. Cheeseman,G.S. Virdi.Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash[J]. Resources, Conservation & Recycling . 2005 (1)
  • 7Chen-Chiu Tsai,Kuen-Sheng Wang,Ing-Jia Chiou.Effect of SiO 2 –Al 2 O 3 –flux ratio change on the bloating characteristics of lightweight aggregate material produced from recycled sewage sludge[J]. Journal of Hazardous Materials . 2005 (1)

共引文献1

同被引文献45

引证文献3

二级引证文献38

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部