摘要
In this paper, we present the design, simulation, and experimental verification of a dual-band free-standing metamaterial filter operating in a frequency range of 1 THz–30 THz. The proposed structure consists of periodically arranged composite air holes, and exhibits two broad and flat transmission bands. To clarify the effects of the structural parameters on both resonant transmission bands, three sets of experiments are performed. The first resonant transmission band shows a shift towards higher frequency when the side width w;of the main air hole is increased. In contrast, the second resonant transmission band displays a shift towards lower frequency when the side width w;of the sub-holes is increased, while the first resonant transmission band is unchanged. The measured results indicate that these resonant bands can be modulated individually by simply optimizing the relevant structural parameters(w;or w;) for the required band. In addition, these resonant bands merge into a single resonant band with a bandwidth of 7.7 THz when w;and w;are optimized simultaneously. The structure proposed in this paper adopts different resonant mechanisms for transmission at different frequencies and thus offers a method to achieve a dual-band and low-loss filter.
In this paper, we present the design, simulation, and experimental verification of a dual-band free-standing metamaterial filter operating in a frequency range of 1 THz–30 THz. The proposed structure consists of periodically arranged composite air holes, and exhibits two broad and flat transmission bands. To clarify the effects of the structural parameters on both resonant transmission bands, three sets of experiments are performed. The first resonant transmission band shows a shift towards higher frequency when the side width w_1 of the main air hole is increased. In contrast, the second resonant transmission band displays a shift towards lower frequency when the side width w_2 of the sub-holes is increased, while the first resonant transmission band is unchanged. The measured results indicate that these resonant bands can be modulated individually by simply optimizing the relevant structural parameters(w_1 or w_2) for the required band. In addition, these resonant bands merge into a single resonant band with a bandwidth of 7.7 THz when w_1 and w_2 are optimized simultaneously. The structure proposed in this paper adopts different resonant mechanisms for transmission at different frequencies and thus offers a method to achieve a dual-band and low-loss filter.
基金
supported by the Doctorate Scientific Research Foundation of Hezhou University,China(Grant No.HZUBS201503)
the Promotion of the Basic Ability of Young and Middle-aged Teachers in Universities Project of Guangxi Zhuang Autonomous Region,China(Grant No.KY2016YB453)
the Guangxi Colleges and Universities Key Laboratory Symbolic Computation,China
Engineering Data Processing and Mathematical Support Autonomous Discipline Project of Hezhou University,China(Grant No.2016HZXYSX01)