期刊文献+

旧水泥路面板粒化再生混合料级配设计的试验研究 被引量:1

Experimental Study of Gradation Design of Granular Recycled Mix for Old Concrete Pavement
下载PDF
导出
摘要 结合旧水泥混凝土路面粒化集料的特性,应用传统级配设计方法与最小空隙率法级配设计理论,对比分析了再生混合料空隙率和密度等物理性能的差异,论证了采用最小空隙率法进行级配设计的合理性。通过比较两种设计方法得出的混合料的无侧限抗压强度和冻融循环试验结果,得出水泥板再生粒化料采用最小空隙率法进行级配设计时,再生混合料的力学性能和耐久性要优于按照传统级配设计方法,且设计方法简单,所需设计参数较少,更符合水泥板粒化料的特性,适宜在工程应用中推广。 Based on the characters of the existing concrete road granulated regeneration aggregate,and using the traditional grading design method and the minimum voidage design method,the differences of the void content and the density of the recycled mix are analyzed,and the gradation designed by the minimum voidage is rational.By the comparison of the test results of the unconfined compression strength and the freeze-thaw cycles through the two different design methods,the mechanical properties and durability of the granulated regeneration aggregate are superior to the traditional method.And at the same time,the minimum voidage method is simple and need the less design parameters,thus it suits to be popularized in the future engineering.
出处 《浙江交通职业技术学院学报》 CAS 2017年第3期13-18,共6页 Journal of Zhejiang Institute of Communications
基金 浙江省交通科技计划项目(2016-2-21)
关键词 旧水泥混凝土路面板 粒化再生 级配设计 最小空隙率法 existing concrete pavement slab granulated regeneration gradation design minimum voidage method
  • 相关文献

参考文献3

二级参考文献8

  • 1JTJ058-2000.公路工程集料试验规程[S].[S].,..
  • 2JTJ034-2000.公路路面基层施工技术规范[S].[S].,..
  • 3胡力群.半刚性基层材料结构类型与组成设计研究[D].西安:长安大学,2002.
  • 4公路工程集料试验规程(JTJ058-2000)[J]公路,2000(05).
  • 5关于发布交通行业标准《公路工程无机结合料稳定材料试验规程》、《公路工程集料试验规程》的通知[J]公路,1995(02).
  • 6关于发布交通行业标准《公路路面基层施工技术规范》的通知[J]公路,1994(03).
  • 7JTJ 034-2000.公路路面基层施工技术规范[S],2000.
  • 8沙爱民,胡力群.半刚性基层材料抗冲刷性能试验方法研究[J].中国公路学报,2002,15(2):4-7. 被引量:47

共引文献39

同被引文献1

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部