军用头盔工效学性能测试系统开发应用研究
被引量:2
Developing and Applying of Military Helmet Ergonomics Performance Testing System
摘要
“头盔工效和力学性能测试系统”的开发是从力学角度客观定量地评价头盔工效学性能的一个有益尝试,可为民用头盔的设计与研究提供重要的理论依据,对提高头盔的稳定性和佩戴舒适性有重要意义。
出处
《中国个体防护装备》
2003年第2期9-10,共2页
China Personal Protective Equipment
二级参考文献10
-
1杨忠,吴惠祥,戴俊,沈春林.一种航空旋转密封件摩擦系数高精度测试仪[J].仪器仪表学报,2005,26(12):1211-1214. 被引量:3
-
2ALLEN D, BUCKLAND B, LASTNIK A. Method for determining the center of mass of helmets [ R ]. ADA141633, USA Army Natick R&D center, Natick, MA 1982:432-443.
-
3ROBINETTE K M, WHITESTONE J J. Methods for characterizing the human head for the design of helmets [ R ]. ADA263875, Wright-Patterson AFB, 1992,3:397-409.
-
4PERRY C E, BUHRMAN J R. Effect of helmet inertial properties on head and neck response during + Gz impact accelerations [ J ]. Safe J, 1996,26 (2) :34-41.
-
5ZHOU H, DAI SH L, AN G Q. The 'helmet-head-neck' kinetics model and its shock response of military helmets [J ]. China Personal Protection Equipment, 2001 (1): 11-15.
-
6CHARLIE C. Borland C + + Builder 3 unleashed [ M ]. Sams publishing, 2002.
-
7Jinji, Guo, Haoxu, Xing, Gao, Yang, Chengbai, Wu, Jincai, Pei, Zhijian, Liu.Calculation and Test of Hitting Force of Firing Bullet on the Bulletproof Helmet[J].Journal of Systems Engineering and Electronics,1998,9(3):69-76. 被引量:1
-
8刘驰,袁燕.浅谈服装的实用性与艺术性[J].四川丝绸,1999(2):39-41. 被引量:6
-
9吕正,姚和军,林延东.头盔面窗测量用转动架的研制[J].现代计量测试,2001,9(1):41-43. 被引量:3
-
10陈晓,戴诗亮.军用头盔工效学性能测试系统开发应用研究[J].中国个体防护装备,2003(2):9-10. 被引量:2
共引文献8
-
1高尚,陈仁文.复杂构件转动惯量测量分析与研究[J].江苏航空,2009(S1):106-108.
-
2王超,唐文彦,张晓琳,王军,马强.大尺寸非回转体质量特性一体化测量系统的设计[J].仪器仪表学报,2012,33(7):1634-1640. 被引量:23
-
3毕国玲,赵建,李淳,孙强.高精度双目头盔畸变检测系统[J].计算机测量与控制,2012,20(8):2036-2038.
-
4郭志荣,毛天喜,杨振.扭摆法测刚体转动惯量中空气阻尼的数值模拟[J].兰州文理学院学报(自然科学版),2014,28(1):38-40. 被引量:5
-
5刘巍,张洋,马鑫,尚志亮,贾振元.基于双目视觉的转动惯量测量方法[J].仪器仪表学报,2014,35(9):1972-1978. 被引量:6
-
6郭志荣,殷保祥.抗空气阻尼扭摆法测刚体转动惯量的实现[J].兰州文理学院学报(自然科学版),2016,30(1):40-42.
-
7吴明磊,杨忠,刘何庆,金超武,张贺磊,赵颖杰,卜伟平.飞行员头盔质量特性测量设备和方法[J].航天医学与医学工程,2016,29(5):357-362. 被引量:7
-
8程力,郭春裕,陈佳,张治权,沈宇.安全头盔负荷全自动测试装置的研究[J].科技创新与应用,2017,7(2):60-61.
同被引文献22
-
1杨忠,吴惠祥,戴俊,沈春林.一种航空旋转密封件摩擦系数高精度测试仪[J].仪器仪表学报,2005,26(12):1211-1214. 被引量:3
-
2吴明磊,马春生,刘威,岳卉,赵广,丛红,王荣娣,李连臣,黄世霖.弹射时装显示器头盔对人体的生物力学效应[J].中华航空航天医学杂志,2005,16(4):267-271. 被引量:11
-
3ALLEN D, BUCKLAND B, LASTNIK A. Method for determining the center of mass of helmets [ R ]. ADA141633, USA Army Natick R&D center, Natick, MA 1982:432-443.
-
4ROBINETTE K M, WHITESTONE J J. Methods for characterizing the human head for the design of helmets [ R ]. ADA263875, Wright-Patterson AFB, 1992,3:397-409.
-
5PERRY C E, BUHRMAN J R. Effect of helmet inertial properties on head and neck response during + Gz impact accelerations [ J ]. Safe J, 1996,26 (2) :34-41.
-
6ZHOU H, DAI SH L, AN G Q. The 'helmet-head-neck' kinetics model and its shock response of military helmets [J ]. China Personal Protection Equipment, 2001 (1): 11-15.
-
7CHARLIE C. Borland C + + Builder 3 unleashed [ M ]. Sams publishing, 2002.
-
8Chris P, John B, Erica D, et al. The effects of variable helmetweight on head response and neck loading during lateral + Gy im- pact [ C ] //41st Annual Symposiumof Safe Association. Jackson- vile, FL, US : Safe Association ,2003:88 - 95.
-
9Erica D, Steve M, John B, et al. The effects of variable helmet weight and subject bracing on neck during frontal Gx impact [ C ]// 2st Annual Symposium of Safe Association . Jacksnnvilc, US:Safe Association , 2004 : 186 - 192.
-
10Edwin G P. Influence of head mass properties on head/neck dur- ing standard helicopter impact condition [ C ]//60th Annual Forum of American Helicopter Society. Baltimore, MD, US: American Helicopter Society ,2004 : 14901510.
引证文献2
-
1杨忠,吴惠祥,姜遇红,樊琼剑.头盔质量特性高精度测试仪研究[J].仪器仪表学报,2009,30(2):433-437. 被引量:9
-
2杨洋,徐诚,管小荣,王亚平.基于逆向动力学的步兵头盔舒适性数值分析[J].兵工学报,2015,36(2):321-326. 被引量:5
二级引证文献14
-
1高尚,陈仁文.复杂构件转动惯量测量分析与研究[J].江苏航空,2009(S1):106-108.
-
2王超,唐文彦,张晓琳,王军,马强.大尺寸非回转体质量特性一体化测量系统的设计[J].仪器仪表学报,2012,33(7):1634-1640. 被引量:23
-
3毕国玲,赵建,李淳,孙强.高精度双目头盔畸变检测系统[J].计算机测量与控制,2012,20(8):2036-2038.
-
4郭志荣,毛天喜,杨振.扭摆法测刚体转动惯量中空气阻尼的数值模拟[J].兰州文理学院学报(自然科学版),2014,28(1):38-40. 被引量:5
-
5刘巍,张洋,马鑫,尚志亮,贾振元.基于双目视觉的转动惯量测量方法[J].仪器仪表学报,2014,35(9):1972-1978. 被引量:6
-
6郭志荣,殷保祥.抗空气阻尼扭摆法测刚体转动惯量的实现[J].兰州文理学院学报(自然科学版),2016,30(1):40-42.
-
7吴明磊,杨忠,刘何庆,金超武,张贺磊,赵颖杰,卜伟平.飞行员头盔质量特性测量设备和方法[J].航天医学与医学工程,2016,29(5):357-362. 被引量:7
-
8程力,郭春裕,陈佳,张治权,沈宇.安全头盔负荷全自动测试装置的研究[J].科技创新与应用,2017,7(2):60-61.
-
9陈蔡山林,王亚平,杨洋,李新俊,何龙.单兵系统工效学指标体系的建立及权重分配[J].兵器装备工程学报,2017,38(3):51-56. 被引量:3
-
10姜缪文,闫健卓,陈继民.基于拓扑优化技术的军用头盔内胆结构三维打印[J].兵工学报,2017,38(9):1845-1853. 被引量:4
-
1杨诚,朱中民.军用头盔纵横谈[J].军事史林,2002,0(5):43-45.
-
2杨柳,穆军.最后一道防线——国产军用头盔全接触[J].世界军事,2003,0(12):36-40.
-
3唐思源,王艾成,孙晋.新中国军用头盔盘点[J].兵工科技,2004,0(7):24-29.
-
4马素琴,徐强.基于工效学的防火服的优化设计[J].国际纺织导报,2007,35(11):74-76. 被引量:5
-
5张福远.小小头盔本领大[J].少儿科技,2009(1):26-26.
-
6洪允征.衣袖体现“工效学”的若干措施[J].服装科技,1999(3):22-24.
-
7刘伟伟.军用头盔传奇[J].少年发明与创造(小学版),2014(7):28-29.
-
8梁伟青,翁泽宇,姜耀林,朱甫宏,梅金虎.电动钉枪性能测试系统[J].轻工机械,2009,27(1):80-82. 被引量:4
-
9许黎明,邓琦林,徐俊杰,叶磊.往复类电动工具性能测试系统[J].机床与液压,2003,31(6):272-274. 被引量:2
-
10马志杰.小装备 大用途——透视国产军用头盔[J].兵工科技,2003,0(12M):28-29.