期刊文献+

12MeV直线感应加速器二极管优化设计研究

Optimum design for 12MeV linear induction accelerator diode
下载PDF
导出
摘要 用 MAGIC程序对设计的多种 1 2 Me V直线感应加速器的二极管结构进行模拟计算 ,得出了二极管阴极表面电场强度分布 ,并根据实验结果 ,得到了结构最佳设计的二极管模型 ;随后利用扫描电镜方法对不同天鹅绒的结构进行了分析与发射性能实验研究。最后得到优化后的二极管产生的电子束束流参数为 :发射束流 Ie=8.50 k A ,传输束流 I8≥ 3.0 k A ,打靶束流 I0 ≥ 2 .30 k A。 A series of optimization design for electron diode in 12MeV linear induction accelerator are studied by using numerical simulation code MAGIC and experiment method in order to improve the electron beam quality. MAGIC code solves the Maxwell equations in the presence of charged particle, electron field distribution on cathode surface which influences electron emission is given, and the optimum diode is obtained by comparing the results of experiment in 12 MeV linear induction accelerator. The paper also gives SEM analysis and experiment comparison of velvet emission. Finally, emitted current Ie=8.52 kA, beam current I8≥3.0 kA, targeted current I0≥2.30 kA with optimum diode are obtained.
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2001年第3期360-364,共5页 High Power Laser and Particle Beams
基金 国防科技基础研究项目资助课题
关键词 直线感应加速器 二极管 优化设计 天鹅绒 束流 Diodes Electron beams Optimization Scanning electron microscopy Systems analysis
  • 相关文献

参考文献8

二级参考文献3

  • 1河野照哉,电场数值计算方法,1985年
  • 2刘学悫,阴极电子学,1980年
  • 3代志勇,中国核科技报告.CNIC-01327/CAEP-0015,1998年,12页

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部