期刊文献+

三维C/SiC复合材料在线液相渗透连接 被引量:11

On-Line Joining of 3D Fiber Reinforced C/SiC Composites
下载PDF
导出
摘要 为得到C/SiC复合材料的强连接,利用三维编织碳纤维增韧碳化硅(C/SiC)复合材料在制备过程中残留的孔隙,采用Ni合金作为中间层在1 300℃保温45min、真空条件下对三维C/SiC复合材料用液相渗透连接方法进行了在线连接,所施压力为20MPa。利用扫描电镜(SEM)及能谱初步分析了连接情况,结果表明Ni合金与C/SiC复合材料有较好的润湿性,续沉积SiC后试样三点弯曲强度可达σ拉=252.1MPa,σ压=260.3MPa。 On-line liquid infiltration joining of carbon fiber reinforced silicon carbide (C/SiC) composites was carried out with Ni alloy as the interlayer at the temperature of 1 300 degreesC a holding time of 45min in vacuum and at an applied pressure of 20MPa. Result shows that the Ni alloy employed have favorable wettability with C/SiC composites. Scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) showed that the Ni alloy can infiltrate into the pores of the composites. The three-point bending strengths of the joints were alpha (tensile)=252.1MPa, alpha (compress)=260.3MPa.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2004年第1期101-104,共4页 Rare Metal Materials and Engineering
关键词 C/SIC 复合材料 在线连接 液相渗透 C/SiC composite on-line joining process liquid infiltration
  • 相关文献

参考文献4

  • 1[1]Li Junqin, Xiao Ping. Joining Ceramic to Metal Using a Powder Metallurgy Method for High Temperature Applications[J]. Journal of Materials Science, 2001, 36: 1 383~1 387
  • 2[2]Nakamura M et al. Joining of Carbon Fiber-Reinforced Silicon Nitride Composites with 72Ag-26Cu-2Ti Filler Metal[J]. Journal of Materials Science, 1996, 31: 4 629~4 634
  • 3[3]Nakamura M et al. Joining of Si-Ti-C-O Fiber-Assembled Ceramic Composites with 72Ag-26Cu-2Ti Filler Metal [J]. Journal of Materials Science, 1996, 31: 6 099~6 104
  • 4[4]Salvo M et al. Joining of CMCs for Thermonuclear Fusion Application[J]. Journal of Nuclear Materials, 1996, 1(233~237): 947~953

同被引文献137

引证文献11

二级引证文献46

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部