摘要
本文研究了相分析清洗过程误差的来源和减小的方法。发现传统的清洗方法不适用于不稳定和微细相的分析,必须加以改进。因为这种清洗过程中由于析出物的分解和损失造成的误差远大于清洗企图减小的误差。
The cause and elimination method of error of cleaning step during phase analysis have been studied. It has been found that the traditional cleaning method must not be used in analysis of unstable and fine phases and must be improved .because the error caused by dissolution and loss of phases during cleaning far more than the error which be eliminated by cleaning as expectance.
出处
《冶金分析》
CAS
CSCD
北大核心
1992年第2期4-7,共4页
Metallurgical Analysis
关键词
钢
定量分析
不稳定相
制样
微细相
Phase analysis, Fine precipitate in steel, Unstable precipitate in steel, Cleaning method
