期刊文献+

非直纤维的细观动态拔出模型分析 被引量:4

DYNAMIC MESO-SCALE MODEL OF THE PULLOUT BEHAVIOR FOR A NON-STRAIGHT FIBER
下载PDF
导出
摘要  在Chanvillard关于非直纤维静态拔出模型基础上,建立非直纤维的细观动态模型。此模型通过纤维与基体接触界面剪应力的传递考虑纤维的动态拔出过程,并考虑应变率效应。同时,适当选取阈值,建立基于细观损伤演化的纤维脱粘和拔出动态模型。此模型可以很好地模拟Chanvillard关于非直纤维的静态实验结果,并能反映复合材料的应变率影响。 A dynamic meso-scale model for non-straight steel fiber is proposed based on the work of Chanvillard G. The model is time-dependent and related to the impact loading through the interfacial shearing stress along the embedded part of the steel fiber. Thus, properly setting the thresholds, a dynamic model of the fiber's debonding and pullout process considering the evolution of meso-damage is constructed. The rate sensitivity of the reinforcing effect of the steel fibers can be demonstrated in this model. The model prediction fits the experimental data of Chanvillard G for non-straight steel fiber under static condition well.
出处 《复合材料学报》 EI CAS CSCD 北大核心 2004年第1期109-113,共5页 Acta Materiae Compositae Sinica
基金 国家自然科学青年基金(No.10202022) 冲击波物理和爆轰波物理国家重点实验室 中国科学院材料的力学行为和设计重点实验室资助。
  • 相关文献

参考文献4

二级参考文献9

  • 1[1]Favre J P. Characterization of fibre/resin bonding in composites using a pull-out test [J]. Int J Adhes, 1981,1: 234-241.
  • 2[2]Beckert W, Lauke B. Critical discussion of the single-fibre pull-out test:Does it measure adhesion [J]. Composites Science and Technology, 1997,57 : 1689-1706.
  • 3[3]Singletary J, Lauke B, Beckert W. Examination of fundamental assumptions of analytical modeling of fiber pull-out test [J].Mechanics of Composites Materials and Structures, 1997, 4: 95-112.
  • 4[4]Kessler H, Schuller T, Beckert W, Lauke B. A fracture-mechanics model of the microbond test with interface friction [J].Composites Science and Technology, 1999, 59: 2231-2242.
  • 5[5]Schuller T, Beckert W, Lauke B. A finite element model to include interfacial roughness into simulations of micromechanical tests [J].Composites Materials Science,1999, 15: 357-366.
  • 6[6]Outwater J O, Murphy M C. Fracture energy of unidirectional laminates [J].Modern Plastics, 1970, 47: 160-169.
  • 7[7]Beckert W, Lauke B. Fracture mechanics finite element analysis of debonding crack extension for single fibre pull-out specimen [J]. J Mater Sci Lett, 1995,14: 333-336.
  • 8王秀峰,王永兰,金志浩.碳纤维增强水泥复合材料的电导性能及其应用[J].复合材料学报,1998,15(3):75-80. 被引量:55
  • 9史美伦,陈志源.硬化水泥浆体孔结构的交流阻抗研究[J].建筑材料学报,1998,1(1):30-35. 被引量:37

共引文献104

同被引文献23

  • 1董振英,李庆斌.异型钢纤维拉拔界面模型[J].工程力学,2004,21(6):102-107. 被引量:3
  • 2田晓滨,赵晓鹏,周本濂.短纤维增强复合材料的仿生模型──Ⅰ 哑铃状短纤维增强复合材料的应力分析[J].金属学报,1994,30(4). 被引量:11
  • 3黄俊,姜弘道.一种新的界面脱粘和纤维拔出模型[J].应用力学学报,2006,23(3):473-478. 被引量:6
  • 4Chanvillard N.Modeling the Pullout of the Wire-drawn Steel Fibers[J].Cement and Concrete Research,1999,29(3):1027-1037.
  • 5Alwan J M,Naaman A E.Effect of Mechanical Clamping on the Pull-out Response of Hooked Steel Fibers Embedded in Cementitious Matrices[J].Concrete Science and Engineering,1999,1(3):15-25.
  • 6Cox H L. The elasticity and strength of paper and other fibrous materials[J].Brit J Applied Physics 1952,3:73-79
  • 7Chanwillard G. Modeling the pullout of wiredrawn steel fibers [J].Cement and Concrete Research 1999, 29(7) : 1027-1037
  • 8Stang H, Shah S P. Failure of fibre-reinforced composites by pull-out fracture[J].Journal of Materials Science, 1986,21:953-957
  • 9沈关林,胡更开.复合材料力学[M].北京:清华大学出版社,2006:15.
  • 10Chen B, Yuan Q, Luo J, et al. Hierarchical and Intersectional Microstructure of Graceful Fig shell [J]. Computational Materials Sci- ence, 2010, 49: $331.

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部