期刊文献+

Effect of additive on the formation of polyacrylonitrile membrane 被引量:1

Effect of additive on the formation of polyacrylonitrile membrane
下载PDF
导出
摘要 The effect of additives CaCl\-2 and CaCl\-2/H\-2O on the properties of polyacrylonitrile(PAN) ultrafiltration(UF) membranes prepared by phase inversion process was studied. The dissolving capacity of the casting solution for CaCl\-2 was enhanced by the addition of H\-2O. The membranes are characterized in terms of the pure water flux and molecular weight cut\|off(MWCO). The addition of CaCl\-2 or CaCl\-2/H\-2O to the casting solution increases the resulting membrane permeability. The effect of additives CaCl\-2 and CaCl\-2/H\-2O on the properties of polyacrylonitrile(PAN) ultrafiltration(UF) membranes prepared by phase inversion process was studied. The dissolving capacity of the casting solution for CaCl\-2 was enhanced by the addition of H\-2O. The membranes are characterized in terms of the pure water flux and molecular weight cut\|off(MWCO). The addition of CaCl\-2 or CaCl\-2/H\-2O to the casting solution increases the resulting membrane permeability.
出处 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2004年第2期191-193,共3页 环境科学学报(英文版)
关键词 POLYACRYLONITRILE CaCl 2 H 2O dissolving capacity ultrafiltration membranes polyacrylonitrile CaCl 2 H 2O dissolving capacity ultrafiltration membranes
  • 相关文献

参考文献24

  • 1[1]Aerts P, Hoof E V, Leysen R et al., 2000. Polysulfone-aerosil composite membranes Part 1. The influence of the addition of aerosil on the formation process and membrane morphology[J]. J Membr Sci, 176: 63-73.
  • 2[2]Botino A, Capannelli G, Munari S et al. , 1988. High performance ultrafiltration membranes cast from LiCl doped solutions[J]. Desalination, 68: 167-177.
  • 3[3]Cabasso I, Klein E, Smith J K, 1976. Polysulfone hollow fibers. I. Spinning and properties[J]. J Appl Polym Sci, 20: 2377-2394.
  • 4[4]Cabasso I, Klein E, Smith J K, 1977. Polysulfone hollow fibers. Ⅱ. Morphology [J]. J Appl Polym Sci, 21: 165-180.
  • 5[5]Chandorikar M V, Bhavsar P C, 1983. Evaluation of polyacrylonitrile and poly (methyl methacrylate) as membrane materials for reverse osmosis[ J ]. Indian J Tech, 21: 124-125.
  • 6[6]Cho S H, Park J S, Jo S M et al., 1994. Influence of ZnCl2 on the structure and mechanical properties of poly (acrylonitrile) fibres [ J ]. Poly Int, 34: 333- 337.
  • 7[7]Kim I C, Yun H G, Lee K H, 2002. Preparation of asymmetric polyacrylonitrile membrane with small pore size by phase inversion and post-treatment process [J]. J Membr Sci, 199: 75-84.
  • 8[8]Kim S R, Lee K H, Jhon M S, 1996. The effect of ZnCl2 on the formation of polysulfone membrane[J]. J Membr Sci, 119: 59-64.
  • 9[9]Koenhen D M, Mulder M H, Smolders C A, 1977. Phase separation phenomena during the formation of asymmetric membranes[ J]. J Appl Polym Sci, 21:199-215.
  • 10[10]Kraus M A, Nemas M, Frommer M A, 1979. The effect of low molecular weight additives on the properties of aromatic polyamide membranes [ J ]. J Appl Polym Sci, 23: 445-452.

同被引文献4

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部