摘要
为了研究注拉吹工艺参数对制品性能的影响 ,利用POLYFLOW软件模拟分析了塑料瓶的拉伸 -吹塑过程 ,预测了成型瓶子的厚度分布 ,并与实测值进行对比。结果表明 :改变拉伸速率 ,对瓶坯的厚度分布有很大的影响 ,速率过大或者过小都会产生不利的影响 ;模拟计算对于成型瓶子最终的厚度分布有较好的预测能力。
Numerical simulations were performed on POLYFLOW software to study the influence of the injection-stretch-blow molding process of bottles on features of the product.Results showed that profiles of the thickness were greatly influenced by stretching speed; both high speed and low speed influlenced the thickness adversely.It was found that the thickness of bottles was well predicted by computer simulation.
出处
《中国塑料》
CAS
CSCD
北大核心
2004年第2期48-51,共4页
China Plastics
基金
国家自然科学基金重大项目 (5 0 3 90 0 90 )
关键词
注拉吹工艺
厚度分布
瓶坯
计算机模拟
injection-stretch-blow molding process
thickness distribution
parison
computer simulation
