摘要
从动力波吸收机的原理出发,研究了它的吸收机理、传质性能和流体力学特性。并介绍了它在化工吸收过程、尾气排放过程的脱硫、除尘中的应用。
共引文献14
-
1董红伟,孙国刚.气液撞击流洗涤器压降计算[J].石油化工设备,2008,37(3):28-31.
-
2黄笃树,周大军.烟气脱硫除尘一体化技术的研究进展[J].杭州化工,2005,35(1):15-18.
-
3张弛,刘伟.引进技术在我国硫酸企业的应用[J].浙江化工,2005,36(5):34-36.
-
4黄笃树,周大军.用动力波逆向喷射洗涤器脱除烟气中的二氧化硫[J].化工环保,2005,25(5):406-408. 被引量:12
-
5曾华星,齐美富,李国莲.动力波洗涤器压力损失数值模拟研究[J].环境科学与技术,2006,29(2):27-28. 被引量:3
-
6张弛.1996~1997年度国内硫酸工业技术进展[J].江苏化工,1998,26(6):29-32.
-
7柴芳.高浓度氨氮焦化废水动力波吹脱实验研究[J].企业技术开发,2016,35(9):45-47. 被引量:2
-
8蔡兵,杨洪才,陈珑文.铜冶炼烟气制酸尾气处理实践[J].有色冶金设计与研究,2017,38(2):12-14. 被引量:4
-
9李腾飞,常海锋,郑明,苗和平.硫酸洗涤塔溢流堰的改造实践[J].湖南有色金属,2017,33(4):36-38.
-
10刘彦飞.动力波洗涤器在煤矿逸散性煤尘治理中的试验研究[J].煤矿机械,2005,26(10):31-33.
同被引文献21
-
1蔡永亮.文丘里—水膜除尘装置工作原理探讨及其改进[J].氮肥设计,1995,33(1):55-59. 被引量:2
-
2张理,竹朝霞,肖春生.几种节流装置流体动力特性的实验研究[J].实验技术与管理,2007,24(7):44-47. 被引量:9
-
3CHEN C, YU F, CUI B. Modeling of SO2 conversion in the process of acid-making [C]//The 23rd Chinese Control and Decision Confer- ence. Mianyang: IEEE, 2011, 5:4017 -4022.
-
4ALI M, MAHMUD T, HEGGS P J, et al. A one-dimensional plug- flow model of a counter-current spray drying tower [J]. Chemical En- gineering Research andDesign, 2014, 92(5): 826 - 841.
-
5WAWRZYNIAK P, PODYMA M, ZBICINSKI I, et al. Modeling of air flow in an industrial countercurrent spray-drying tower [J]. Drying Technology, 2012, 30(2): 217 -224.
-
6VOROS J. Parameter identification of Wiener systems with multiseg- ment piecewise-linear nonlinearities [J]. Systems & Control Letters, 2007, 56(2): 99 - 105.
-
7GUO L, LJUNG L. Exponential stability of general tracking algo- rithms [J]. IEEE Transactions on Automatic Control, 1995, 40(8): 1376- 1387.
-
8GUO L, LJUNG L. Performance analysis of general tracking algo- rithms [J]. IEEE Transactions on Automatic Control, 1995, 40(8): 1388 - 1402.
-
9YU F, MAO Z, JIA M. Recursive identification for Hammerstein- Wiener systems with dead-zone input nonlinearity [J]. Journal of Pro- cess Control, 2013, 23(8): 1108 - 1115.
-
10薛定宇,陈阳泉.高等应用数学问题的MATLAB求解[M].北京:清华大学出版社,2005.
二级引证文献6
-
1郑伟忠,赖寿华,张永锋,衷水平,张焕然,刘建强,邱发强,林家永.卡尔多炉处理铜阳极泥生产工艺优化实践[J].有色金属(冶炼部分),2017(11):18-20. 被引量:9
-
2郑江华,任学根,马晓东,宗红星.50 kVA直流电弧炉处理卡尔多炉渣试验研究[J].中国有色冶金,2023,52(1):54-59. 被引量:1
-
3罗娟.BDO装置废酸处理工艺探讨[J].硫酸工业,2022(12):38-40.
-
4李洪江,杨向辉,刘艳敏,刘丽梅,雷朔.从铜阳极泥中回收粗硒的工艺改进和生产实践[J].云南冶金,2023,52(2):76-80.
-
5吴英来,丁来兵.含钠钾盐废硫酸再生裂解炉耐火砖的耐受性试验研究[J].硫酸工业,2023(5):62-64. 被引量:1
-
6杨晓永,任维东,周鹤立,杜彦君,刘发存,田飞.一种利用烟气实现硒还原扩能改造的技术研究[J].金川科技,2023(4):23-26.
-
1王政才.利用旧空塔改造动力波洗涤器的实践[J].有色冶金设计与研究,2002,23(3):33-34. 被引量:2
-
2朱登玲,彭家惠,赵敏,王彩霞,李志新.不同长度聚丙烯纤维对陶瓷模具石膏抗折强度的影响研究[J].非金属矿,2014,37(3):33-35. 被引量:9
-
3席磊,刘森起.电解锰渣在水泥工业上的应用初探[J].冶金环境保护,2010(1):59-62. 被引量:3
-
4黄志远.株洲冶炼厂锌二系统硫酸装置的空塔改造[J].硫酸工业,2000(4):14-17. 被引量:2
-
5赵延槟,童开发.吸收与传热的类比[J].高等函授学报(自然科学版),1994(3):48-50.
-
6刘江潮.液氯钢瓶卸掉瓶阀后的氯气泄漏速率计算[J].中国氯碱,2003(3):43-44. 被引量:2
-
7周莉骅,刘有智,李光明.MDEA吸收CO_2的活化剂及吸收设备研究进展[J].化工中间体,2010,6(6):7-12. 被引量:6
-
8吕惠生,张敏华,刘宗章,王福元,宋佰顺.规整填料在铜洗塔中的应用研究[J].化肥工业,1996,23(5):17-20. 被引量:2
-
9吕惠生,张敏华,刘宗章,董秀芹,曾庆军.脱硫塔设备与工艺的优化研究[J].无机盐工业,1996,10(6):37-40.
-
10陈颖,赵越超,梁宏宝,张宏宇.以MDEA为主体的混合胺溶液吸收CO_2研究进展[J].应用化工,2014,43(3):531-534. 被引量:12