期刊文献+

波纹板聚结油水分离器的研究 被引量:22

Development of Corrugated Plate Coalescing Oil-water Separator
下载PDF
导出
摘要 以镀锌板为基材 ,表面涂覆涂料A ,开发出了新型聚结板材并应用于波纹板聚结除油器 ,同时对除油器的局部结构进行了改进 ,可除去 30 μm以上的油珠。尽管所配原水中的油为密度大 (0 895kg/L)、难分离的润滑油 ,在进水含油量从 2 0~30 0mg/L波动大的情况下 ,出水一直稳定在 15mg/L以下 ,一般为 10mg/L左右。 A new type of coalescing plate material,Zincified plate coated with dope A,which used in corrugated plate coalescing oil-water separator,is studied in this paper.Some major components of separator are improved,and more than 30 μm oil droplets can be removed.Though the oil in wastwater is high density lubricant and the oil concentration of inlet fluctuate is from 20 to 300 mg/L,the oil concentration of outlet is below 15 mg/L,currently about 10 mg/L.
出处 《交通环保》 2004年第1期26-28,共3页
关键词 油水分离 波纹板 聚结 oil water separation corrugated plate coalescing/crude dehydration
  • 相关文献

参考文献3

二级参考文献8

  • 1张绍林.临床检验[M].成都:四川科学技术出版社,1986.118-124.
  • 2金熙,工业水处理技术问答及常用数据,1997年,620,106页
  • 3王连生,环境化学进展,1995年,370页
  • 4崔玉川,废水处理工艺设计计算,1994年,322页
  • 5谢重阁,环境中石油污染物的分析技术,1987年,33页
  • 6张绍林,临床检验,1986年,14页
  • 7郑雯君.微量含油废水处理装置——粗粒化油水分离器[J]化工环保,1988(04).
  • 8郑远扬.波纹板填料油水分离器及其计算方法[J].化工学报,1992,43(2):236-241. 被引量:4

共引文献31

同被引文献137

引证文献22

二级引证文献150

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部