期刊文献+

二元复合齐聚物对SL法用光固化树脂的协同增强效应 被引量:2

Synergetically enhanced properties in the photo-curable resins for stereolithography composed with binary oligomers
下载PDF
导出
摘要 采用一种新的高分子量、低黏度的齐聚物NX-2013与环氧丙烯酸酯组成复合齐聚物,通过配方优化,得到体积收缩率为5.4%的SL法用光固化树脂。进一步将NX-2013进行改性,复合后树脂体系在保持低体积收缩率、较低黏度优点的同时,拉伸强度由改性前的27.6MPa提高到39.6MPa。 The volumentric shrinkage around 5.4% is attained in the photo-curable resins composed by binary oligomers of epoxy acrylate and NX-2013 with big relative molecular mass. On the other hand, when the NX-2013 is improved, high performance resin with tension strength enhanced from 27.6 MPa to 39.6 MPa is obtained along with low shrinkage and low viscosity. \;
作者 孙小英
出处 《浙江科技学院学报》 CAS 2004年第1期24-27,共4页 Journal of Zhejiang University of Science and Technology
基金 浙江科技学院科研基金资助(ZF200301)
关键词 二元复合齐聚物 SL法 光固化树脂 协同增强效应 立体光造型 快速成型 stereolithography photocurable resin synergetic enhancment
  • 相关文献

参考文献1

二级参考文献16

  • 1尹希猛,王运赣,黄树槐.快速成型技术——90年代新的造型工具[J].中国机械工程,1993,4(6):25-27. 被引量:62
  • 2[1]Hull C. Rapid prototyping and manufacturing: fundamentals of stereolithography[M]. Dearborn: SME, MI, 1992.1-20.
  • 3[2]Ashely S. Rapid prototyping systems[J]. Mechanical Engineering, 1991,113(4): 34-42.
  • 4[3]Kruth J P. Material incress manufacturing by rapid prototyping techniques[J]. Annals of the CIRP, 1991, 40(2): 603-614.
  • 5[4]Xue Y, Gu P. Riview of rapid prototyping technologies and systems[J]. Computer-Aided Design, 1996,28(4): 307-318.
  • 6[5]Dickens P M. Research development in rapid prototyping[J]. Proc. Mech. Engrs. Part B: Journal of Engineering Manufacture, 1995,(209): 261-165.
  • 7[8]Zak G , Chan A Y F, Park C B, et al. Viscosity analysis of photopolymer and glass-fibre composites for rapid layered manufacturing[J]. Rapid Prototyping Journal, 1996,(23):16-23.
  • 8[9]Karrer P, Corbel S, Andre J C, et al. Shrinkage effects in photopolymerizable resins containing filling agents: application to stereophotolithography [J]. Journal of Polymer Science, Part A: Polymer Chemistry,1992, 30(13): 2715-2723.
  • 9[13]Pappas S P.Radiation curing science and technology[M]. NJ:Plenum Press, 1992.1-16.
  • 10[14]Fouassier J P, Rabek J F. Radiation curing in polymer science and technology-volumn 1 fundamentals and methods[M]. New York: Elsevier Applied Science, 1993.1-47.

共引文献2

同被引文献10

引证文献2

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部