期刊文献+

连续铸钢用中间包衬里损伤的红外检测分析 被引量:2

Infrared Detection and analysis on the Lining Damage of a Continuous Casting Tundish
下载PDF
导出
摘要 利用一维稳态传热模型,计算中间包底面温度,建立了底面温度与中间包衬里损伤程度间的对应关系,发现中间包底面温度随着衬里损伤程度增加而增加.红外热像检测表明:中间包底面温度随着包龄的增加而增加;红外热像技术可以有效地对中间包衬里损伤进行检测;利用所建立的理论关系式,可以实现对中间包红外热像的定量分析. The temperature of the bottom surface of a tundish was calculated by using an one-dimensional steady-state heat transfer model. The relationship between the temperature of the bottom surface and the damage degree of the tundish lining was established. It was found that the temperature rises with the increase of damage degree. Practical examinations proved that the temperature of the bottom surface rises with the increase of tundish age, and both the detection of damage degree and the quantitative analysis of tundish lining can be carried out by the infrared image technology.
出处 《北京科技大学学报》 EI CAS CSCD 北大核心 2004年第1期45-48,共4页 Journal of University of Science and Technology Beijing
基金 国家"973"重大基础理论研究资助项目(No.199900650)
关键词 连续铸钢 中间包 衬里损伤 红外检测 红外热像 一维稳态传热 tundish infrared image one-dimensional steady-state heat transfer damage
  • 相关文献

参考文献3

二级参考文献6

  • 1李晓刚.催化装置损伤的红外检测数据库.第六届全国设备诊断年会[M].北京,1997,10..
  • 2付冬梅 李晓刚.红外热像保温效果评估软件研制与应用[J].无损检测,.
  • 3李晓刚 付冬梅.催化装置损伤的红外检测[J].无损检测,1998,3.
  • 4程尚模.传热学[M].西安:西安交通大学出版社,1988..
  • 5何穷 等.数值计算方法[M].北京:中国建设出版社,1991..
  • 6李晓刚,付冬梅,柯伟.加热炉管规范管理与在线剩余寿命评估系统[J].石油化工腐蚀与防护,1999,16(2):53-58. 被引量:9

共引文献41

同被引文献18

  • 1L M Aksel'Rod,V G Mizin,M K Filyashin,et al.The Steelmaking Ladle-ways towards Saving Heat[J].Refractories and Industrial Ceeramics,2003,44 (3):123-126.
  • 2Olena Volkova,Dieter Janke.Modelling of Temperature Distribution in Refractory Ladle Lining for Steelmaking[J].ISIJ International,2003,43(8):1 185-1 190.
  • 3Chakraborty S ,Sahai Y. Effect of Holding Time and Surface Cover in Ladles on Liquid Steel Flow in Continuous Casting Tundishes[J]. Metallurgical Transactions B-Process Metal- lurgy, 1992, 23 (2)=153.
  • 4Chakraborty S. Sahai Y. Mathematical-Modeling of Trans port Phenomena in Continuous Casting Tundishes . 1. Tran sient Effects During Ladle Transfer Operations[J]. Ironmak-ing and Steelmaking, 1992, 19 (6):479.
  • 5Chakraborty S, Sahai Y. Mathematical Modeling of Trans- port Phenomena in Continuous Casting Tundishes-Transient Effects Owing to Varying Ladle Stream Temperature[J]. Ironmaking and Steelmaking, 1992, 19 (6):488.
  • 6Sheng L. Jonsson D Y. Investigation of Transient Fluid Flow and Heat Transfer In A Continuous Casting Tundish By Nu- merical Analysis Verified With Nonisothermal Water Model Experiments[J]. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 1999, 30 (5) :979.
  • 7Morales R D, Barreto J D, Lopez Ramirez S , et al. Molt Flow Control in a Multistrand Tundish Using a Turbulence Inhibitor[J]. Metallurgical and Materials Transactions B- Process Metallurgy and Materials Processing Science, 2000, 31 (6):1505.
  • 8Lopez-Ramirez S, Barreto J D, Palafox-Ramos J ,et al. Mod eling Study of the Influence of Turbulence Inhibitors on the Molten Steel Flow, Tracer Dispersion, and Inclusion Trajec tories in Tundishes[J]. Metaliurgieal and Materials Transac- tions B-Process Metallurgy and Materials Processing Science, 2001, 32 (4):615.
  • 9Patankar S V, Spalding D B. Calculation Procedure for Heat, Mass and Momentum-Transfer in 3 Dimensional Parabolic Flows[J]. International Journal of Heat and Mass Transfer, 1972, 15 (10):1787.
  • 10吴晓东,田乃媛,徐安军,等.大型中间包传热分析[J].钢铁,1999,34(S1):507.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部