期刊文献+

ZG20 Mn Mo焊接后热工艺

RESEARCH ON POSTHEATING PROCEDURE IN WELDING OF ZG20MnMo LOW ALLOY HIGH STRENGTH STEEL
下载PDF
导出
摘要 用插销法研究了后热对ZG2 0MnMo低合金高强钢焊接热影响区冷裂倾向和强韧性的影响规律。试验结果表明低温后热可以防止ZG2 0MnMo焊后氢致延迟裂纹的产生 ,其过热区显微组织主要为板条状马氏体和少量析出碳化物。低温后热时不能有效地改善过热区的组织性能 ,后热的作用主要通过氢的扩散逸出来体现。 In this paper, the effect rule of postheat on both cold crack sensitivity and toughness of the HAZ of ZG20MnMo LAHS (low alloy high strength) steel was investigated by means of the implant test method. The results show that low temperature postheat could prevent the occurrence of hydrogen induced crack, the microstructure of overheated region of ZG20MnMo was main lath martensite and a little amount of carbide. The structure property doesn't improve availably when postheated in low temperature, the function of postheat is primarily to benefit the diffusion of hydrogen .
出处 《焊接》 2004年第4期33-35,共3页 Welding & Joining
关键词 ZG20MnMo 焊接 后热 插销法 低合金高强钢 显微组织 氢致裂纹 postheat, hydrogen induced crack, ZG20MnMo
  • 相关文献

参考文献2

  • 1陈忠孝 张筑耀 杨德新.30CrMnSiNi2A钢焊接HAZ的组织对氢行为和性能的影响[J].焊接学报,1987,8(2).
  • 2陈忠孝 杨德新 刘继臣.30CrMnSiNi2A超高强钢HAZ后热韧化抗裂机理的探讨.焊接学报,1983,4(3):14-23,54.

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部