期刊文献+

0Cr18Ni10Ti管道钢的随机循环应变-寿命关系 被引量:3

Random Cyclic Strain-Life Relations of 0Cr18Ni10Ti Pipe Steel
下载PDF
导出
摘要 试验研究了管道钢0Cr18Ni10Ti的随机循环应变-寿命关系。基于Coffin-Manson方程,提出了考虑了任意存活概率和置信度的随机CSL关系的模型及参数的求解方法。模型由概率-应变-寿命曲线、置信度-应变-寿命曲线和概率-置信度-应变-寿命曲线组成,分别用于表征试验数据分散性规律、数据量以及两者同时对概率评价的影响。试验数据的分析结果验证了模型的有效性和实用性。 Experimental study is performed on the random cyclic strain-life relations of the new pipe steel, 0Cr18Ni10Ti, by strain-controlled fatigue tests. Probabilistic models for characterizing the relations are presented on a basis of the Coffin-Manson strain-life equation. Three kinds of effects on probabilistic assessments are taken into account, which are the scattering regularity, the amount, and the combined effect of scattering regularity and the amount of the test data. With respect to these effects, the models are consisted of three kinds of probabilistic curves, i.e. the survival probability-strain-life curves, the confidence-based strain-life curves, and the probability and confidence-based strain-life curves. Availability and feasibility of the models are indicated by an analysis to the test results.
出处 《核动力工程》 EI CAS CSCD 北大核心 2004年第2期142-146,共5页 Nuclear Power Engineering
基金 国家自然科学基金(50075073) 全国优秀博士学位论文作者专项资金(2002067) 教育部优秀青年教师资助计划项目(2101)资助
关键词 管道 OCr18Ni1OTi钢 随机循环应变-寿命关系 COffin-Mason方程 Pipe 0Cr18Ni10Ti steel Random cyclic strain-life relations Coffin-Manson equation
  • 相关文献

参考文献9

  • 1赵永翔.应变疲劳可靠性分析的现状及展望[J].机械工程学报,2001,37(11):1-6. 被引量:35
  • 2赵永翔,高庆,王金诺.估计三种常用应力-寿命模型概率设计S-N曲线的统一方法[J].核动力工程,2001,22(1):42-52. 被引量:37
  • 3Wirching P H,Tomg T Y,Martin W S.Advanced Fatigue Reliability Analysis[J].Int J Fatigue,1991,13:389-394.
  • 4Bargmann H,Rustenberg I.Devlukla J.Reliability of Metal Components in Fatigue-a Simple Algorithm for the Exact Solution[J].Fatigue Fract.Eng.Mater.Struct.,1994,17:1445-1457.
  • 5Baldwin J D,Thacker J G.A Strain-Based Fatigue Reliability Analysis Method[J].J Mech Des ASME,1995,117:229-234.
  • 6Zhao J,Tang J,Wu H C.A Reliability Assessment Method in Strain-Based Fatigue Life Analysis[J].J Press Vess Tech ASME,1998,120:99-104.
  • 7Zhao Y X,Wang J N,Gao Q.Statistical Model for the Random Cyclic Strain-Life Relations of lCrl8Ni9Ti Pipe-Weld Metal under Temperature of 240°C[J].Nucl Eng Des,2001,205(3):241-249.
  • 8赵永翔,马勇,李朋州.0Cr18Ni10Ti管道钢的概率机械性能[J].核动力工程,2003,24(5):445-449. 被引量:2
  • 9.GB6399-86 金属材料轴向低周疲劳试验方法[S].北京:中国标准出版社,1986..

二级参考文献17

  • 1高镇同.疲劳应用统计学[M].北京:国防工业出版社,1986.365-381.
  • 2赵永翔.低周疲劳短裂纹行为和可靠性分析[M].成都:西南交通大学,1998..
  • 3Freudenthal A M. Physical and Statistical Aspects of Fatigue[J]. Adv. Appl. Mech., 1956, 4:116 - 156.
  • 4Kecocioglu D. Reliability Analysis of Mechanical Components and Systems[J]. Nucl. Eng. Des., 1972, 19:259 - 290.
  • 5Haugen E B. Probabilistic Mechanical Design[M]. NewYork, John Wiley and Sons, 1980.
  • 6Proven J W. Probability Fracture Mechanics and Reliability[M]. Dordrecht, Martnus Nijhoff Publishers 1987.
  • 7AMSE Boiler and Pressure Vessel Code Section Ⅲ-1995,Rules for Construction of Nucless Power Plant Components Division 1--Appendices[S].
  • 8赵永翔,学位论文,1998年
  • 9Ling J,Int J Fatigue,1997年,19卷,5期,415页
  • 10高镇同,疲劳应用统计学,1986年

共引文献69

同被引文献51

  • 1赵永翔,杨冰,孙亚芳,高庆.LZ50车轴钢的概率循环本构模型[J].机械工程学报,2004,40(9):48-53. 被引量:13
  • 2程光旭,匡震邦,楼志文.焊接力学非均匀体低周疲劳循环滞回能实验研究[J].金属学报,1993,29(7). 被引量:2
  • 3龚士弘,盛光敏,李毅,韦树莲,孙恒志,南天越,刘文彦.压力容器钢16MnR在地震载荷下的低周疲劳性能[J].钢铁,1995,30(10):48-52. 被引量:7
  • 4高镇同 付惠民.疲劳强度的频率分布和疲劳强度特征函数[J].机械强度,1985,7(2):12-15.
  • 5赵永翔 杨冰 王金诺 高庆 马勇 何朝明 邬平波 杨样 王明新.有限数据下疲劳可靠性设计分析方法与试验研究[R].成都:西南交通大学,2003..
  • 6Koh S K, Stephens R I. Mean Stress Effects on Low Cycle Fatigue for a High Strength Steel[J]. Fatigue Fract Eng Mater Struct, 1991, 14: 413~428.
  • 7Lin C K, Chu C C. Mean Stress Effects on Low Cycle Fatigue for a Precipitation-Hardening Martensitic Stainless Steel in Different Tempers[J]. Fatigue Fract Eng Mater Struct, 2000, 23: 545~553.
  • 8Lin C K, Pai Y L. Low Cycle Fatigue of Austempered Ductile Irons at Various Strain Ratios[J]. Int J Fatigue,1998, 21: 45~54.
  • 9Nakazawa H, Kodama K. Statistical S-N Testing Method with 14 Specimens: JSME Standard Method for Determination of S-N Curves[C]. In: Statistical Research on Fatigue and Fracture, New York: Elsevier Applied Science, 1987: 59~69.
  • 10Ling J, Pan J. A Maximum Likelihood Method for Estimating P-S-N Curves[J]. Inter. J. Fatigue, 1997, 19 (5):415~419.

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部