摘要
Interactions between 63Sn37Pb solder and PBGA metallization (Au/Ni/Cu) duringlaser and infrared reflow soldering were studied. During laser reflow soldering process,a thin layer of AuSn_4 was observed at the interface of the solder bumps, its morphologywas strongly dependent on the laser reflow power and heating time. The solder bumpsformed by the first laser reflow was reflowed again to form the solder joints. TheAuSn_4 compounds formed in the first laser reflow process dissolved into the bulk solderafter the secondary infrared reflow process. The needle-like AuSn_4 changed into rod-like, and distributed inside the solder near the solder/pad interface.
Interactions between 63Sn37Pb solder and PBGA metallization (Au/Ni/Cu) duringlaser and infrared reflow soldering were studied. During laser reflow soldering process,a thin layer of AuSn_4 was observed at the interface of the solder bumps, its morphologywas strongly dependent on the laser reflow power and heating time. The solder bumpsformed by the first laser reflow was reflowed again to form the solder joints. TheAuSn_4 compounds formed in the first laser reflow process dissolved into the bulk solderafter the secondary infrared reflow process. The needle-like AuSn_4 changed into rod-like, and distributed inside the solder near the solder/pad interface.
