摘要
A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its heat balance was calculated. Comparedwith that of a 160kA conventional Hall-Heroult cell (H-H cell), though the melts vol-ume of the drained cell reduced greatly, the whole heat loss from it didn't drop downapparently, and an analysis was presented in the paper. On the other hand, the anode-cathode distance (ACD) of a drained cell was much less than that of a H-H cell, sothe voltage drop on it and heat produced decreased too, steps should be taken to keepa workable heat balance on a drained cell.
A 2D full cell thermo-electric model of 160kA drained cell was set up using finiteelement code to calculate its freeze profile, then the drained cell model was modifiedaccording to the freeze profile computed and its heat balance was calculated. Comparedwith that of a 160kA conventional Hall-Heroult cell (H-H cell), though the melts vol-ume of the drained cell reduced greatly, the whole heat loss from it didn't drop downapparently, and an analysis was presented in the paper. On the other hand, the anode-cathode distance (ACD) of a drained cell was much less than that of a H-H cell, sothe voltage drop on it and heat produced decreased too, steps should be taken to keepa workable heat balance on a drained cell.
基金
supported by the National Key Fundamental Research&Development Project of China(No.G1999064903).