期刊文献+

Si_3N_4-Fe对Al_2O_3-SiC-C质铁沟浇注料性能的影响 被引量:14

Influence of Si_3N_ 4-Fe addition on properties of Al_2O_ 3-SiC-C castable for iron trough and runner
下载PDF
导出
摘要 利用Si3N4 的优良性质及金属塑性相Fe的作用 ,将其添加到高炉出铁沟用Al2 O3-SiC -C浇注料中 ,以改善材料的力学性能和抗氧化性能。对高温处理后试样强度、显气孔率测试以及对氧化层的SEM分析 ,结果表明 ,添加适量的Si3N4 -Fe ,材料的显气孔率降低 ,强度提高 ,抗氧化性增强。 Naihuo Cailiao. Silicon nitride (Si 3N 4)and plastic phase Fe were added to the Al 2O 3-SiC-C castable for iron trough and runner of blast furnace to improve the mechanical properties and anti-oxidation of the castables.The total additions of Si 3N 4-Fe were 0,3%,5% and 8% respectively.The strength, apparent porosity of the specimens after heat treatment were determined,and the microstructure of the oxidation film of the specimens was analyzed by SEM.The results show that adding appropriate amount of Si 3N 4-Fe into castable can decrease the apparent porosity, increase the strength and improve anti-oxidation of the castable obviously.
出处 《耐火材料》 CAS 北大核心 2004年第2期82-84,共3页 Refractories
关键词 Si3N4-Fe AL2O3 SIC 铁沟浇注料 力学性能 抗氧化性能 显气孔率测试 氧化层 Silicon nitride-ferro,Alumina-silicon nitride-carbon,Castable,Anti-oxidation,Blast furnace,Trough
  • 相关文献

参考文献4

  • 1刘清才,张丙怀,林静.Al_2O_3-SiC-C耐火材料在熔融还原熔体中的侵蚀[J].耐火材料,1996,30(3):127-132. 被引量:7
  • 2吉野一 杉山一行 铃木孝.高炉樋用流し込み材の损伤[J].耐火物,1992,44(4):193-193.
  • 3仓田浩辅 河野幸次.溶铣输送用耐火物的损伤[J].耐火物,1992,44(4):205-205.
  • 4李文超主编.冶金与材料物理化学.北京:冶金工业出版社,2001:44

二级参考文献3

共引文献6

同被引文献113

引证文献14

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部