摘要
介绍了镁合金半固态成形的主要技术,详细分析了镁合余半固态触变成形压铸的关键技术和工艺要领。认为半固态锭料的成形温度必须控制在较小的范围内,且锭料温度须保持均匀,建议采用中频加热和分段控制温度;半固态锭料的输送必须采用气体保护下的密闭输送;建议采用实时控制系统,实现压射曲线的最优化设计。
The main technology of magnesium alloy semi-solid forming is introduced. The key technology and technical main points of magnesium alloy semi-solid thixomolding (die-casting) is analyzed in great details. The author suggested that the forming temperature of semi-solid ingot should be controlled in a small range and kept e-quably. Intermediate frequency heating and subsection temperature controlling is adopted. The sealed semi-solid ingot should be transported under protected gas. A real time controlled system is proposed to realize the optimum design of shot curve.
出处
《中国铸造装备与技术》
CAS
北大核心
2004年第2期7-10,共4页
China Foundry Machinery & Technology
