期刊文献+

悬浮扩散共聚法制备聚合物GRIN小球及对折射率梯度分布的控制 被引量:2

Preparation of Polymer Spherical Symmetry GRIN Microsphereby SDC and Controlling Its Gradient Index Distribution
下载PDF
导出
摘要 选用 MMA为单体 M1、 3 FEA为单体 M2 ,通过悬浮扩散共聚法制备了可见光透过率为 90 %的聚合物GRIN小球 .采用剪切干涉法测得小球内的折射率基本上呈抛物线型球对称梯度分布 ,折射率差Δn达到0 .0 1 9. A polymer spherical GRIN sphere lens was prepared by the suspension-diffusion-copolymerization(SDC) technique by using MMA as monomer M 1 and 3FEA as M 2. The radial distribution of refractive index of the lens was measured by the shearing interference method, which demonstrated that the quadratic refractive-index distribution was formed in the sphere lens, and its Δn=0.019.
出处 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2004年第4期753-756,共4页 Chemical Journal of Chinese Universities
基金 安徽省教育厅自然科学基金重点项目 (批准号 :2 0 0 2 KJ0 2 9ZD)资助
关键词 悬浮扩散共聚法 制备 聚合物GRIN小球 剪切干涉法 折射率 梯度分布 小球透镜 微型光学器件 Suspension-diffusion-copolymerization(SDC) Microsphere lens Spherical symmetry gradient index distribution Shearing interferometric technique
  • 相关文献

参考文献7

  • 1储九荣,徐传骧,温序铭,王寿泰.折射率梯度型塑料光纤棒的制备与模拟[J].高等学校化学学报,2002,23(3):500-503. 被引量:1
  • 2YIYou-Min(易佑民) HUANGWei-Tong(黄伟同) GAOYong-Chun(高永椿).Acta. Optica. Sinica.(光学学报),1988,8(1):57-61.
  • 3程蒲,易佑民,高永椿.自聚焦透镜的离子交换工艺的进一步研究[J].量子电子学,1993,10(1):72-75. 被引量:4
  • 4LIUDesen(刘德森) GAOYing-Jun(高应俊).The Substance Foundation of the Changing Refractive Index(变折射率介质的物质基础)[M].Beijing: International Industrial Publishing House,1991..
  • 5DONGYan-Ming(董炎明).Useful Analysis of Polymer Material(高分子材料实用剖析技术)[M].Beijing: Chinese Petrochemical Publishing House,1997..
  • 6GEBing-Heng(葛炳恒).[D].Beijing Science and Engineering Univ.,1990.
  • 7CHUJiu-Rong(储九荣) XUChuan-Xiang(徐传骧).New Material of Chemical Engineering(化工新型材料),2001,6:23-25.

二级参考文献2

共引文献3

同被引文献25

  • 1吕虎,李大海,薄健康,郭东华,王琼华.高折射率玻璃微珠色散特性及影响[J].光子学报,2012,41(1):61-66. 被引量:9
  • 2易佑民,俞强,石市委,杨群,章于川,夏茹.梯度折射率微球回归反射材料的研究[J].光子学报,2005,34(6):848-851. 被引量:3
  • 3张海泉,李云台.织物光反射特性的探讨[J].纺织学报,1995,16(3):16-18. 被引量:7
  • 4张海泉,张长萍.微珠直径对回归反光织物性能的影响[J].江南大学学报(自然科学版),2007,6(3):350-352. 被引量:9
  • 5King A. Advances in retroreflective technologies for road signage, vehicle visibility and pavement markings: Delive- ring safer roads for all[C]//Australian Road Engineering ga Maintenance Conference. Melbourne Victoria Australia, 2010.
  • 6Yuan J, Emura K, Farnham C. A method to measure retro- reflectance and durability of retro-reflective materials for building outer walls[J]. J Build Phys, 2014,13 : 1.
  • 7Kiesewetter D. Numerical simulation of the retroreflection by glass beads [C]//Seventh International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering. Bellingham, 2004 185.
  • 8Grosges T. Retro-reflection of glass beads for traffic road stripe paints[J]. Optical Mater, 2008,30 (10) : 1549.
  • 9Berces A, Robertson S. Keeping people safer through better visibility. Advances in retrorefleetive technologies for road signage, pavement markings and vehicle visibility delivering safer roads[C]//Australaon Road Safety Research and Edu- cation Conference. New Zealand,2012.1.
  • 10King A.Advances in retroreflective technologies for road signage,vehicle visibility and pavement markings:Delivering safer roads for all. Australian Road Engineering&Maintenance Conference . 2010

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部