期刊文献+

MoSi2-淬火45^#钢在油润滑下的摩擦学特性

Tribological properties of MoSi2 under oil Lubrication against quenched 45 # steel
下载PDF
导出
摘要 利用M 200型磨损试验机考察了MoSi2 淬火45#钢在20#机油润滑下的摩擦学性能,采用扫描电子显微镜和微探针仪分析讨论其磨损机理.结果表明:润滑油明显改善了MoSi2材料的摩擦学性能;MoSi2与淬火45#钢对摩在120~150N载荷范围内表现出较好的摩擦磨损综合性能;其磨损机制主要表现为疲劳磨损、磨粒磨损和轻微粘着磨损.图4,参10. The tribological properties of MoSi_2 material under oil lubrication against quenched 45 steel were investigated with an M-200 type friction and wear tester. The worn surface were analyzed by means of scanning electron microscopy, X-ray diffraction and electron probe microanalysis. Results showed that lubricant oil improved the tribological properties of MoSi_2 especially. MoSi_2 showed better friction and wear behavior in the loads range of 120 N to 150 N than at other loads. The main wear mechanisms of MoSi_2 were fatigue wear, abrasive wear and light adhesive wear.4figs.,10refs.
出处 《湘潭矿业学院学报》 2004年第1期55-57,共3页 Journal of Xiangtan Mining Institute
基金 湖南省自然科学基金(02JJY5003) 原湘潭工学院硕士基金(E50242).
关键词 MOSI2 淬火45^#钢 油润滑 磨损机理 MoSi_2 quenched 45 steel oil lubrication wear mechanism
  • 相关文献

参考文献8

  • 1PETROVIC J J. Key development in high temperature structural silicides[J]. Mter Sci Eng. 1999, A261 : 1-5.
  • 2HAWK J A,ALMAN D E,STOLOFF N S. Abrasive wear behavior of MoSi2-Nb composites [J]. Script Metall Mater, 1994,31(4):473-478
  • 3HAWK J A,ALMAN D E. A comparative study of the abrasive wear behavior of MoSi2[J]. Script Metall Mater, 1995,32(5): 725-730.
  • 4HAWK J A,ALMAN D E,PETROVIC J J. Abrasive wear of Si3N4MoSi2 composites [J]. J Am Ceram Soc,1996,79(5): 1297-1302.
  • 5HAWK J A, ALMAN D E,PETROVIC J J. Abrasive wear of Si3N4-MoSi2 composites [J]. Wear,1997,(203-204) :247-256.
  • 6LERY A V,JEE N. Unlubricate wear of ceramics materials [J].Wear, 1998,121 : 363-380.
  • 7张厚安,刘心宇,陈平.二硅化钼自配副在干摩擦条件下的摩擦学性能研究[J].摩擦学学报,2001,21(6):456-459. 被引量:12
  • 8曲建俊,齐毓霖.Si_3N_4-高速钢摩擦副在不同润滑剂润滑下的摩擦磨损性能研究[J].摩擦学学报,1994,14(3):230-237. 被引量:12

二级参考文献16

共引文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部