期刊文献+

微波等离子体处理西南桤木表面的ESR和XPS分析 被引量:24

Study on Alnus nepalensis Surface Treated by Microwave Plasma with ESR and XPS
下载PDF
导出
摘要 采用电子顺磁共振波谱 (ESR)和X射线光电子能谱 (XPS)技术 ,分析了微波等离子体处理前后西南桤木木材表面的性质。ESR图谱分析表明 :经过微波等离子体处理后 ,木材表面可迅速有效地产生大量的自由基 ;XPS图谱分析表明 :微波等离子体处理使木材表面O C原子比增加 ,C1 含量降低 ,而C2 、C3含量增加 ,并有C4 的出现。 Electron Spin Resonance (ESR) and X-ray Photoelectron Spectroscopy (XPS) were used to determine the surface properties of untreated/treated wood in this paper. The spectra of ESR showed that a great deal of free radicals on (Alnus nepalensis ) surface could be generated by MWP treatment; XPS spectra showed that: microwave plasma treatment increased the O/C atomic ratio of the wood surface, decreased C 1, increased C 2 and C 3, and generated C 4 These results suggesting that a great deal of oxygen content groups or peroxides were generated on wood surface after MWP treatment.
出处 《林业科学》 EI CAS CSCD 北大核心 2004年第2期148-151,共4页 Scientia Silvae Sinicae
基金 国家自然科学基金 ( 3 9970 5 96) 云南省自然科学基金 ( 1999C0 0 60M)资助
  • 相关文献

参考文献14

  • 1Chtourou H, Riedl B, Kokta B V. Surface characterizations of modified polyethylene pulp and wood pulps fiber using XPS and inverse gas chromatography. J. Adhesion Sci. Technol,1995,9(5):551-574
  • 2Du G B, Hua Y K,Wang Z. Wood surface treatment with microwave plasma. Wood Adhesives,2000:361-366
  • 3Friedrich J F, Rohrer P et al. Improvement in polymer adhesivity by low and normal pressure plasma surface modification. Surface and Coatings Technology,1993,59:371-378
  • 4Hua X, Kaliaguine S, Kokta B V et al. Surface analysis of explosion pulps by ESCA Part Ⅱ . Oxygen(ls) and sulfur(2p) spectra. Wood Sci,Technol,1993,28:1-8
  • 5Nishimiya K, Hata T, Imamura Y J et al. Analysis of chemical straure of wood charcoal by X-ray photoelectron spectroscopy. J Wood Sci,1998,44:56-61
  • 6杜官本.表面光电子能谱(XPS)及其在木材科学与技术领域的应用[J].木材工业,1999,13(3):17-20. 被引量:24
  • 7杜官本 华毓坤.等离子体及其在木材科学与技术领域应用展望[J].上海:中国林学会木材工业分会论文集(17),1999,10:75-80.
  • 8杜官本,华毓坤,崔永杰,王真.微波等离子体处理木材表面光电子能谱分析[J].林业科学,1999,35(5):104-109. 被引量:27
  • 9杜官本,华毓坤,王真.微波等离子体处理对杉木表面性能的影响[J].木材工业,1998,12(6):17-20. 被引量:34
  • 10杜官本 华毓坤 王真.木材表面微波等离子体处理[J].上海:中国林学会木材工业分会论文集(17),1999,10:81-92.

二级参考文献21

  • 1赵宝忱,韩士杰,苏润洲.影响木材表面自由基的几个因素[J].林业科学,1995,31(1):56-59. 被引量:7
  • 2张爱民,施楣梧,徐僖.微波技术在聚合物加工中的应用[J].塑料工业,1996,24(5):55-59. 被引量:29
  • 3李坚 赵学增 等.砂磨提高胶合强度机理[J].东北林业大学学报,1987,15(4):61-72.
  • 4欧年华.木材表面化学结构的ESR与ESCA分析[J].北京林业大学学报,1982,3:168-178.
  • 5欧年华.用ESR研究木材中的自由基[J].林业科学,1984,20(1):50-56.
  • 6李坚.木质材料的界面特征与无胶胶合[J].东北林学院学报,1989,.
  • 7Karson T A 王殿勋等(译).光电子和俄歇能谱学[M].北京:科学出版社,1983..
  • 8小沼光晴.等离子体与成膜基础[M].北京:国防工业出版社,1994.213.
  • 9杜官本,林业科学,1999年,35卷,1期,95页
  • 10李坚,木质材料的界面特征与无胶胶合技术,1989年,49-58,88-97页

共引文献95

同被引文献170

引证文献24

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部