期刊文献+

桐油改性硼酚醛的耐热性及其复合材料摩擦性能的研究 被引量:19

Heat Resistance of Boron Phenolic Resin Modified by Tung Oil and Frication Property of Its Complex Material
下载PDF
导出
摘要 热失重分析表明该桐油、硼双改性酚醛树脂的起始热分解温度≥400℃,450℃时,碳的残留率≥60%,耐热性明显优于普通的酚醛树脂;红外光谱表明了该双改性树脂的碳骨架上引入了桐油分子长碳链,具有一定的柔韧性和油溶性。用该双改性树脂作为基体树脂制备的无石棉编织型制动带,低温摩擦系数达0 50以上,高温摩擦系数可达0 40以上,且摩擦系数恢复性良好。 Thermogravimetric analysis showed that the initial decomposition temperature of binary-modified phenolic resin by tung oil and boron was above 400 ℃,and remainder mass was above 60% at 450 ℃.IR spectra showed that long chains of molecules of tung oil were bonded on the skeleton of boron phenolic resin.Frication coefficient of non-asbestos woven brake band made with this binary-modified phenolic resin was above 0.50 at low temperature and was above 0.40 at high temperature.The recovery of friction coefficient was well too.
出处 《精细化工》 EI CAS CSCD 北大核心 2004年第6期477-480,共4页 Fine Chemicals
基金 贵州省工业攻关项目基金资助〔黔科合工字(2000)1067号〕~~
关键词 硼酚醛树脂 改性 桐油 摩擦性能 boron phenolic resin modifying tung oil frication property
  • 相关文献

参考文献9

二级参考文献28

共引文献109

同被引文献321

引证文献19

二级引证文献104

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部