期刊文献+

GH169高温合金主要相分析 被引量:7

ANALYSIS OF MAIN PHASES IN GH169 SUPERALLOY
下载PDF
导出
摘要 用透射电镜对GH169高温合金主要强化相γ′、γ″进行分析观察及稳定相δ的亚结构及有关晶体学的测量计算。结果得出,γ″相具有三种不同位向的变体。利用γ′、γ″在(110)倒易面上超结构斑点重合来同时显现γ′、γ″相。通过迹线分析方法测量得出δ相的亚结构为层错,层错面为。 Main strengthening phases, γ′_a, γ″ have been observed by means of TEM in details and microstructure and crystallography of stable δ-phase have been analysed in GH169 superalloy. The results show that these existed three kinds of different orientation variation. Dark field image of γ′, γ″ phases can be obseved in the same time by using superposed superlattice spot of (110) reciprocal plane of γ′_a, γ″ phases. In this study, it was shown that microstructure of δ-phase is stacking fault, fault plane{110}, through TEM observation and by calculating with trace analysis method.
出处 《兵器材料科学与工程》 CAS CSCD 北大核心 1993年第2期51-56,共6页 Ordnance Material Science and Engineering
关键词 高温合金 金属间化合物 弥散强化 GH169 superalloy, intermetallics, precipitation strengthening
  • 相关文献

同被引文献41

  • 1金钦乾.GH169合金析出相定量分析[J].冶金分析,1989,9(1):25-29. 被引量:3
  • 2王广春,管婧,赵国群.锻造成形微观组织优化建模及应用[J].塑性工程学报,2005,12(5):49-53. 被引量:17
  • 3董建新.INCONEL718高温合金的发展[J].兵器材料科学与工程,1996,19(2):46-50. 被引量:24
  • 4H.φ.拉施柯.钢和合金的物理-化学分析[M].北京:国防工业出版社,1989.12.
  • 5王岩,林琳,邵文柱,甄良,张新梅.固溶处理对GH4169合金组织与性能的影响[J].材料热处理学报,2007,28(B08):176-179. 被引量:49
  • 6BROGDON M L, ROSENBERGER A H. Evaluation of the Influence of Grain Structure on the Fatigue Variability of Waspaloy [ M ]. Wiley : Superalloys ,2008.
  • 7Ning Y Q, Fu M W, Chen X. Hot deformation behav- ior of GH4169 superalloy associated with stick δ phase dissolution during isothermal compression process [ J ]. Mater. Sci. Eng. A, 2012, 540(1) : 164.
  • 8Wang Z T, Zhang S H. Kinematics and dynamics mod- el of GH4169 alloy for thermal deformation [J]. Journal of Iron and Steel Research International, 2010, 17 (7). 75.
  • 9Lars Bemsp~ing, Hammam T, Mattiasson K, Schedin E, Melander A, Samuelsson A. Verification of an explicit finite-element code for the simulation of the press forming of rectangular boxes of coated sheet steels [ J ]. Journal of Materials Processing Technology, 1993, 39 (3- 4) : 431.
  • 10Nowotnik A, Sieniawski J, Mrowka-Nowotnik G. Iden- tification of dynamically precipitated phases in hot-work- ing Inconel 718 alloy [ J]. Journal of Achievements in Materials and Manufacturing Engineering, 2008, 31 (2) : 275.

引证文献7

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部