GDX500包装机条透明纸端部折叠装置的改进

Improvement of Folding Device of End of Film in GDX500 Packaging Machine

为解决GDX500包装机生产过程中条透明纸端部缺陷率较高的问题,本文采用一对上、下螺旋折叠片组成的双螺旋成型面在水平折叠通道分别完成上、下折角的折叠,使烟条端部透明纸在水平折叠通道就完成条透明纸的完全折叠并保持压紧状态,以便第二提升器提升。应用效果表明改造后,GDX500包装机条透明纸端部缺陷率由0.548%/台/天降低为0.178%/台/天,GDX500包装机条透明纸端部缺陷问题得到了有效的控制。

In order to solve the problem of high defect rate at the end of film in the production process of GDX500 packaging machine, a pair of double helix forming surfaces composed of upper and lower spiral folding sheets are used to fold the upper and lower folding angles in the horizontal folding channel, respectively, in order to solve the problem that the defect rate is high in the production process of the GDX500 packaging machine. The film at the end of the cigarette strip is made to complete the complete folding of the transparent paper in the horizontal folding channel and to maintain the state of compaction so that the second lift can be lifted. The application results show that the defect rate of end film of GDX500 packaging machine is reduced from 0.548% per day to 0.178% per day, and the defect of end film of GDX500 packaging machine is effectively controlled.