摘要
为了缓解锂硫电池的穿梭效应,提高其电化学性能,本研究利用橘皮为碳源合成了一种氮掺杂的纳米片状多孔碳(NNPC),并通过超临界二氧化碳沉积技术合成了硫碳复合材料(C-S-CO2)作为电池的正极材料,其载硫量达到64%。通过XRD、XPS、SEM、TEM、以及拉曼等方法对材料的表面形貌和特性进行了表征。电化学测试表明,在0.2 C的电流密度下,C-S-CO2复合正极材料的初始比容量达到1065 mAh g?1,远高于熔融渗透法合成的硫碳材料(C-S-M)的初始比容量773 mAh g?1;并且经过200次循环之后,C-S-CO2的保持率能达到70%左右。
A nitrogen-doped nanosheet-like porous carbon (NNPC) was synthesized using orange peel. A method, supercritical CO2 deposition, was used to synthesize carbon/sulfur (C-S-CO2) composites for lithium-sulfur batteries cathode materials. The surface morphology and characteristics of the materials were characterized by XPS, SEM, TEM, and Raman. Electrochemical tests show that the initial specific capacity of C-S-CO2 composite cathode material reaches 1065 mA h g?1 at a current density of 0.2 C, which is significantly higher than carbon/sulfur composites (C-S-M) of 773 mA h g?1 deposited by melting infiltration method. And after 200 cycles, the retention rate of C-S-CO2 can reach about 70%. The improvement of the electrochemical performance of C-S-CO2 is mainly at-tributed to the unique properties of supercritical CO2 which have a better dispersion for sulfur.
作者
朱允
赵伟东
叶向荣
Yun Zhu;Weidong Zhao;Xiangrong Ye(College of Chemistry and Life Sciences, Zhejiang Normal University, Jinhua Zhejiang)
出处
《材料科学》
2019年第2期142-150,共9页
Material Sciences
关键词
橘皮
多孔碳
超临界二氧化碳
锂硫电池
Orange Peel
Porous Carbon
Supercritical CO2
Lithium-Sulfur Batteries