摘要
A common current source, generally used to bias cross-coupled differential amplifiers in a transconductor, controls third harmonic distortion (HD3) poorly. Separate current sources are shown to provide better control on HD3) . In this paper, a detailed design and analysis is presented for a transconductor made using this biasing technique. The transconductor, in addition, is made to offer high Gm, low power dissipation and is designed for linearly tunable Gm with current mode load as one of the applications. The circuit exhibits HD3) of less than –43.7 dB, high current efficiency of 1.18 V-1 and Gm of 390 μS at 1 VGp-p @ 50 MHz. UMC 0.18 μm CMOS process technology is used for simulation at supply voltage of 1.8 V.
A common current source, generally used to bias cross-coupled differential amplifiers in a transconductor, controls third harmonic distortion (HD3) poorly. Separate current sources are shown to provide better control on HD3) . In this paper, a detailed design and analysis is presented for a transconductor made using this biasing technique. The transconductor, in addition, is made to offer high Gm, low power dissipation and is designed for linearly tunable Gm with current mode load as one of the applications. The circuit exhibits HD3) of less than –43.7 dB, high current efficiency of 1.18 V-1 and Gm of 390 μS at 1 VGp-p @ 50 MHz. UMC 0.18 μm CMOS process technology is used for simulation at supply voltage of 1.8 V.
