摘要
In this paper a real-time peak detection method based on modified Automatic Multiscale Field Detection (AMPD) algorithm and Field Programmable Gate Arrays (FPGA) technologies of a time series data is studied, and optimum scaling is highlighted after testing several scales. To validate the results obtained from modified algorithm, they are compared with the results of original AMPD method. As data of this study, three-phase voltage values of a power station are used. A detail detective sensitivity analysis of phase-to-phase voltage values is tried at different scales. Moreover, the original algorithm is tested regarding the off-line mode to obtain optimum scaling for real-time peak point detection. It is concluded that the peak detection of minimum and maximum points of data series achieved by modified algorithm is very close to the results of original AMPD algorithm.
In this paper a real-time peak detection method based on modified Automatic Multiscale Field Detection (AMPD) algorithm and Field Programmable Gate Arrays (FPGA) technologies of a time series data is studied, and optimum scaling is highlighted after testing several scales. To validate the results obtained from modified algorithm, they are compared with the results of original AMPD method. As data of this study, three-phase voltage values of a power station are used. A detail detective sensitivity analysis of phase-to-phase voltage values is tried at different scales. Moreover, the original algorithm is tested regarding the off-line mode to obtain optimum scaling for real-time peak point detection. It is concluded that the peak detection of minimum and maximum points of data series achieved by modified algorithm is very close to the results of original AMPD algorithm.
