摘要
For Hall plates, the ratio of signal over thermal noise is determined by material properties, thickness, layout geometry, magnetic field, and the electric power at which the plate is operated. For traditional Hall plates with four contacts, the optimum choice is a symmetrical device with medium-sized contacts. This paper shows that the signal-to-noise-ratio (<em>SNR</em>) can be further increased by up to 90% for Hall plates with more than four contacts. Supply currents flow through several pairs of contacts, while a signal conditioning circuit taps output voltages at all pairs of contacts and sums them up. We compute the total thermal noise of the sum of correlated noise voltages and relate it to the total magnetic sensitivity. We also prove that for electrically linear devices a spinning current scheme cancels out zero point errors (offset errors) in a strict sense. All our investigations use the definite resistance matrix of multi-port Hall plates. We develop an analytical theory based on recent advances in the theory of Hall plates, and then we compute the integrals and matrices numerically for symmetrical Hall plates with six to 40 contacts. We also present measurements in accordance with our theory.
For Hall plates, the ratio of signal over thermal noise is determined by material properties, thickness, layout geometry, magnetic field, and the electric power at which the plate is operated. For traditional Hall plates with four contacts, the optimum choice is a symmetrical device with medium-sized contacts. This paper shows that the signal-to-noise-ratio (<em>SNR</em>) can be further increased by up to 90% for Hall plates with more than four contacts. Supply currents flow through several pairs of contacts, while a signal conditioning circuit taps output voltages at all pairs of contacts and sums them up. We compute the total thermal noise of the sum of correlated noise voltages and relate it to the total magnetic sensitivity. We also prove that for electrically linear devices a spinning current scheme cancels out zero point errors (offset errors) in a strict sense. All our investigations use the definite resistance matrix of multi-port Hall plates. We develop an analytical theory based on recent advances in the theory of Hall plates, and then we compute the integrals and matrices numerically for symmetrical Hall plates with six to 40 contacts. We also present measurements in accordance with our theory.
作者
Udo Ausserlechner
Udo Ausserlechner(Sense and Control Department, Infineon Technologies AG, Villach, Austria)
