摘要
In this study, the wing design problem for different planforms for supersonic transport (SST) under supersonic and transonic cruise conditions is discussed to obtain knowledge of the supersonic air-foil from the viewpoint of wing planform dependency. Two types of planforms were considered—a cranked arrow wing with a high sweep-back angle and a tapered wing with a low sweep- back angle. The optimum airfoils of these planforms were designed by efficient global optimization, which combined the evolutionary algorithm with the Kriging surrogate model. To acquire design knowledge, the functional analysis of variance was applied to the solution space and the design space. The design results show that the optimum airfoil and the contribution ratios of design variables for the airfoils of the two planform are different.
In this study, the wing design problem for different planforms for supersonic transport (SST) under supersonic and transonic cruise conditions is discussed to obtain knowledge of the supersonic air-foil from the viewpoint of wing planform dependency. Two types of planforms were considered—a cranked arrow wing with a high sweep-back angle and a tapered wing with a low sweep- back angle. The optimum airfoils of these planforms were designed by efficient global optimization, which combined the evolutionary algorithm with the Kriging surrogate model. To acquire design knowledge, the functional analysis of variance was applied to the solution space and the design space. The design results show that the optimum airfoil and the contribution ratios of design variables for the airfoils of the two planform are different.
作者
Yuki Kishi
Masahiro Kanazaki
Yoshikazu Makino
Kisa Matsushima
Yuki Kishi;Masahiro Kanazaki;Yoshikazu Makino;Kisa Matsushima(Guraduate School of System Design, Tokyo Metropolitan University, Tokyo, Japan;Aeronautical Technology Directorate, Japan Aerospace Exploration Agency, Tokyo, Japan;Faculty of Engineering, University of Toyama, Toyama, Japan)
