期刊文献+

Optimization of the Physical Aperture of the Parabolic Reflector Antenna

Optimization of the Physical Aperture of the Parabolic Reflector Antenna
下载PDF
导出
摘要 In fields like astronomy and radar technology, high-gain antennas are required for long-distance communication. Due to its relatively large gain, the use of parabolic antennas has become very popular over time, because they can easily achieve gains of above 30 dB at microwave and higher frequencies. Today, most systems’ success depends on how well the antennas perform. These antennas are available in different types and sizes. Each antenna’s effective area usually has less than the actual physical area of the antenna surface. This means that the unused area of the antenna is massive, and a waste. The aim of the research is to show that the actual physical aperture of a parabolic antenna can be reduced as much as possible to equal the effective area, as given by the antenna formula, thereby saving manufacturing costs, improve the aesthetics. In other words, the focus of this work is to experimentally show that reflector antenna can be made of smaller sizes but better performance. Measurements were taken from different positions from a parabolic antenna, the signal level measured and compared with signal levels for optimal performance. In fields like astronomy and radar technology, high-gain antennas are required for long-distance communication. Due to its relatively large gain, the use of parabolic antennas has become very popular over time, because they can easily achieve gains of above 30 dB at microwave and higher frequencies. Today, most systems’ success depends on how well the antennas perform. These antennas are available in different types and sizes. Each antenna’s effective area usually has less than the actual physical area of the antenna surface. This means that the unused area of the antenna is massive, and a waste. The aim of the research is to show that the actual physical aperture of a parabolic antenna can be reduced as much as possible to equal the effective area, as given by the antenna formula, thereby saving manufacturing costs, improve the aesthetics. In other words, the focus of this work is to experimentally show that reflector antenna can be made of smaller sizes but better performance. Measurements were taken from different positions from a parabolic antenna, the signal level measured and compared with signal levels for optimal performance.
作者 Nkordeh Nsikan Akindele Ayoola Ololade Oladoyin Amadi Eberi Ibinabo Bobmanuel Nkordeh Nsikan;Akindele Ayoola;Ololade Oladoyin;Amadi Eberi;Ibinabo Bobmanuel(Department of Business Analytic and Information Management, University of Delaware, Newark, USA;Department of Cybersecurity, University of Dallas, Dallas, USA)
出处 《Open Journal of Applied Sciences》 2024年第1期182-192,共11页 应用科学(英文)
关键词 PARABOLIC ANTENNA RECEPTION MANUFACTURING COST Parabolic Antenna Reception Manufacturing Cost
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部