摘要
The purpose of this article is to show the role and influence of fluid injection, porosity on two-phase flows in porous media for the purpose of improving and increasing recovery efficiency assisted by oil. An experimental study was carried out in porous media, it is a plexiglass cylinder filled with sands saturated with crude oil. Pressure drop and data processing for two-phase flow are measured and processed using a differential pressure sensor connected to an acquisition computer. It thus makes it possible to determine the pressure difference between the inlet and the outlet of the porous medium over time. In this experiment, the flow rates at the inlet and the outlet of the porous medium were measured as a function of time using a flow rate and a pump. To describe these flows we will use Darcy’s model.
The purpose of this article is to show the role and influence of fluid injection, porosity on two-phase flows in porous media for the purpose of improving and increasing recovery efficiency assisted by oil. An experimental study was carried out in porous media, it is a plexiglass cylinder filled with sands saturated with crude oil. Pressure drop and data processing for two-phase flow are measured and processed using a differential pressure sensor connected to an acquisition computer. It thus makes it possible to determine the pressure difference between the inlet and the outlet of the porous medium over time. In this experiment, the flow rates at the inlet and the outlet of the porous medium were measured as a function of time using a flow rate and a pump. To describe these flows we will use Darcy’s model.
