Computer Aided Design and Performance Analysis of Inverse Fluidized Bed Biofilm Reactors with Special Reference to Bioplastic Synthesis

Poly Laevo Lactic Acid (PLLA), in spite of being an excellent bioplastic, has exorbitantly high market price due to the high cost of raw material (lactose, glucose, sucrose). Hence, its manufacture is being attempted starting from waste effluents such as cheese whey and molasses. Earlier studies on the same in fluidized bed and semifluidized bed biofilm reactors yielded encouraging results. The present study therefore involves design and analysis of inverse fluidized bed biofilm reactors for lactic acid synthesis. The performance features of the bioreactor have been studied both mathematically as well as experimentally. The inverse fluidized bed biofilm reactor has been found to provide more than 75% conversion of sucrose/lactose even at high capacities (high feed flow rates) exceeding 56,000 L/hr, within a reasonably low reactor volume. The fractional substrate conversion increases, though sluggishly, with increase in feed flow rate due to bed expansion and also with increase in cell mass concentration in biofilm due to enhancement in intrinsic rate of bioconversion. The inverse fluidized bed biofilm reactor of proposed design could be safely recommended for the commercial synthesis of polymer grade lactic acid from waste effluents such as cheese whey and molasses. The low operating cost of the bioreactor (due to downflow mode of operation) enhances the economy of the process. This would also help in significantly lowering the market price of the green plastic (PLLA) and shall promote its large scale manufacture and utilisation.